Manuals / Brands / Home Audio / Stereo Receiver / Yamaha / Home Audio / Stereo Receiver

Yamaha HTR-5250 Controlling the Components, Connected to This Unit, ■Example: To control a YAMAHA CD player

1 67

Download 67 pages, 3.97 Mb

Controlling the Components

Connected to This Unit

■Example: To control a YAMAHA CD player

5	3
	7

1Make sure that VOLUME is set to the “ m” position.

2Set the selector dial to the CD position.

3 Turn on the power.

4 Press INPUT.

The indicator lights up for about three second.

5 Press CD (number 1) while the indicator is lit.

6Press p.

Refer to page 45 for the CD player operation buttons.

7 Adjust the volume.

If you set the remote control with the manufacturers’

codes listed from page i at the end of this

manual, you can control other brands of components. Refer to “Setup codes” on page 48 for details.

PRESET REMOTE CONTROL

OPERATION ADVANCED

English

Contents

Page SAFETY INSTRUCTIONS FCC INFORMATION (for US customers only) We Want You Listening For A Lifetime CAUTION: READ THIS BEFORE OPERATING YOUR UNIT FEATURESCONTENTS GETTING STARTED Checking the Package Contents Control Battery Replacement Using the Remote Control CONTROLS AND FUNCTIONS Front Panel Page Display Remote Control Description of the Numeric Buttons ■When selecting an input source ■When selecting a preset station number SPEAKER SETUP Speakers to Be Used Speaker Placement CONNECTIONS Before Connecting Components Connecting the Antennas ■AM loop antenna (included) ■Connecting the AM loop antenna ■Outdoor AM antenna ■Ground (GND terminal) Connecting an Audio Component Connecting a Video Component ■VIDEO terminals (composite) ■VIDEO AUX terminals (on the front panel) Connecting to an External Decoder Connecting the Speakers ■Speaker cables ■Connecting to the MAIN SPEAKERS terminals ■Connecting to the REAR and CENTER SPEAKERS terminals ■Connecting to an external amplifier IMPEDANCE SELECTOR Switch Connecting the Power Supply Cords ADJUSTING THE SPEAKER BALANCE Before You Start Adjusting Using the Test Tone Page PLAYING A SOURCE ■To mute the sound ■When you have finished using this unit ■BGV (background video) function ■AUTO ■DTS ■ANALOG ■Switching the input mode ■Notes on playing a source encoded with DTS ■Notes on playing an LD source ■Notes on the digital signal DIGITAL SOUND FIELD PROCESSOR (DSP) EFFECT Selecting a DSP Program Canceling the Sound Effect (turning off the effect speakers) TUNING Automatic Tuning Manual Tuning Automatic Preset Tuning (for FM stations only) Manual Preset Tuning To Recall a Preset Station Exchanging Preset Stations RECORDING A SOURCE ON TAPE, MD OR VIDEO CASSETTE SOUND FIELD PROGRAM Page ■For Hi-Fiaudio sources CINEMA DSP: Dolby Surround + DSP/Dolby Digital + DSP/DTS + DSP ■Dolby Pro Logic + 2 digital sound fields ■Dolby Digital or DTS + 3 digital sound fields SET MENU Description of Each Item 5. MAIN LVL 6.D.D. LFE (Adjusting the output level of the LFE channel for Dolby Digital) 7.D-RANGE(Adjusting the dynamic range) 8.DTS LFE (Adjusting the output level of the LFE channel for DTS) 9.CNTR DELAY (Adjusting the delay of the sound from the center speaker) 10.MEM. GUARD (Locking the settings) DELAY TIME AND SPEAKER OUTPUT LEVELS Delay Time Sound Output Level of the Center Right Rear and Left Rear Speakers and Subwoofer Adjusting Method SLEEP TIMER Setting the SLEEP Timer Canceling the Selected SLEEP Timer PRESET REMOTE CONTROL Selector Dial Commonly used buttons in any position of the selector dial Controlling the Components Connected to This Unit Description of Each Position ■CD position ■DVD/LD position ■DVD MENU position ■VCR position ■CBL/SAT position ■TV position Advanced Information ■Returning to the factory-setcodes TROUBLESHOOTING Page ■ Tuner ■Remote control ■ Others ■When playing back a source encoded with DTS SPECIFICATIONS GLOSSARY INDEX LIST OF MANUFACTURER’S CODES LISTES DES CODES FABRICANT