Yamaha HTR-5250 IMPEDANCE SELECTOR Switch, Connecting the Power Supply Cords, ■AC OUTLETS (SWITCHED)

CONNECTIONS

IMPEDANCE SELECTOR Switch

WARNING

Do not change the IMPEDANCE SELECTOR switch setting while the power of this unit is on, otherwise the unit may be damaged.

If this unit fails to turn on when STANDBY/ON (or POWER) is pressed, the IMPEDANCE SELECTOR switch may not be fully slide to either position. If so, slide the switch to either position fully when this unit is in the standby mode.

Select the right or left position according to the impedance of speakers in your system. Be sure to move this switch only when this unit is in the standby mode.

		(U.S.A. model)	If you use	left position	right position
				If you use one pair of main	If you use one pair of main
IMPEDANCE				speakers, the impedance of	speakers, the impedance of
	SELECTOR			each speaker must be 4 Ω or	each speaker must be 8 Ω or
				higher.	higher.
				If you use two pairs of main	If you use two pairs of main
			Main	speakers, the impedance of	speakers, the impedance of
			speakers	each speaker must be 8 Ω or	each speaker must be 16 Ω or
				higher.	higher.
					[Canada model only]
					The impedance of each
					speaker must be 8 Ω or
					higher.
			Rear speakers	The impedance of each	The impedance of each
				speaker must be 6 Ω or	speaker must be 8 Ω or
				higher.	higher.
			Center	The impedance must be 6 Ω	The impedance must be 8 Ω
			speaker	or higher.	or higher.

Connecting the Power Supply Cords

■AC OUTLETS (SWITCHED)

(U.S.A. model)

After completing all connections, connect the AC power cord to an AC power outlet. Disconnect the AC power cord if you will not use this unit for a long period of time.

U.S.A. and Canada models ..............................	2 OUTLETS
Australia model ..................................................	1 OUTLET

Use these outlets to connect the power cords from your components to this unit. The power to the AC OUTLET(S) is controlled by this unit’s STANDBY/ON (or POWER and STANDBY). These outlets will supply power to any connected component whenever this unit is turned on. The maximum power (total power consumption of components) that can be connected to the AC OUTLET(S) is 100 W.

To AC outlet

SWITCHED

18