Manuals / Brands / Home Audio / Stereo System / Yamaha / Home Audio / Stereo System

Yamaha HTR-5490 Using the Remote Control, ■Handling the remote control, aAMP, dMUTE, English, sVOL +/–, pAV POWER, fSET MENU, gON SCREEN, oSELECT k/n, INTRODUCTION

1 83

Download 83 pages, 1.97 Mb

oSELECT k/n

Selects the another component to control independently from the input that has been selected by pressing an input selector button.

pAV POWER

Turns on and off the power of the component selected by the input selector button.

aAMP

Selects AMP or other component selected by the input selector button.

sVOL +/–

Increases or decreases the volume level.

dMUTE

Mutes the sound. The MUTE indicator turns on when the MUTE function is on. Press again to restore the audio output to the previous volume level.

fSET MENU

Selects the SET MENU mode.

gON SCREEN

Displays the input or operation status.

hSTEREO/EFFECT

Switches the normal stereo or DSP effect reproduction. When STEREO is selected, 2-channel input signals are directed to the main left and right speakers without effect sounds. All Dolby Digital and DTS audio signals except for the LFE channel are also directed to the main left and right speakers.

CONTROLS AND FUNCTIONS

Using the Remote Control

30° 30°

Approximately 6 m (20 feet)

The remote control transmits a directional infrared beam. Be sure to aim the remote control directly at the remote control sensor on the main unit during operation.

■Handling the remote control

•Do not spill water or other liquids on the remote control.

•Do not drop the remote control.

•Do not leave or store the remote control in the following types of conditions:

–high humidity or temperature such as near a heater, stove or bath;

–dusty places; or

–in places subject to extremely low temperatures.

INTRODUCTION

English

7

Contents

IMPORTANT SAFETY INSTRUCTIONS I CAUTION CAUTION CAUTION: READ THIS BEFORE OPERATING YOUR UNIT III CAUTION CONTENTS FEATURES GETTING STARTED Checking the Package Contents Installing Batteries in the Remote Control CONTROLS AND FUNCTIONS Front Panel qSTEREO/EFFECT wA/B/C/D/E ePROGRAM l / h ■Opening and closing the front panel door Remote Control Using the Remote Control Front Panel Display 1 Processor indicators Rear Panel SPEAKER SETUP Speakers to Be Used Speaker Placement Connecting the Speakers ■SUBWOOFER jack Notes ■IMPEDANCE SELECTOR switch WARNING CONNECTIONS Before Connecting Components Connecting Video Components Page Connecting Audio Components Page Connecting to a Subwoofer Connecting an External Decoder Connecting the Power Supply Cords Turning on the Power ON-SCREENDISPLAY (OSD) OSD Modes P01 CONCERT HALL Selecting the OSD Mode SPEAKER MODE SETTINGS Summary of SPEAKER SET Items 1A through 1F ADJUSTING THE SPEAKER OUTPUT LEVELS Before You Begin SUR.) TEST DOLBY SUR BASIC PLAYBACK 5 Start playback or select a broadcast station on the source component 6 Adjust the volume to the desired output level 7 Select a DSP program if desired ■BGV (background video) function ■To mute the sound Press MUTE on the remote control ■When you have finished using this unit Input Modes and Indications Selecting a Sound Field Program Selecting PRO LOGIC or Neo: Virtual CINEMA DSP SILENT CINEMA DSP DIGITAL SOUND FIELD PROCESSING (DSP) Understanding Sound Fields Hi-FiDSP Programs CINEMA-DSP Sound Design of CINEMA-DSP ■Dolby Digital/DTS + DSP sound field effect ■Dolby Digital Matrix 6.1/DTS ES + DSP sound field effect ■Dolby Pro Logic + DSP sound field effect ■ Dolby Pro Logic /DTS Neo: CINEMA-DSPPrograms Spectacle Sci-Fi Adventure General ■For audio-videosources in 2-channel:No. 5 to Game TV SPORTS MONO MOVIE TUNING Connecting the Antennas Automatic and Manual Tuning Presetting Stations ■Manually presetting stations 1 Tune in to a station A A AM 576 kHz 2 Press MEMORY (MAN’L/AUTO FM) C :AM 576 kHz Tuning in to a Preset Station Exchanging Preset Stations BASIC RECORDING REMOTE CONTROL FEATURES Control Area Setting the Manufacturer Code Programming a New Remote Control Function (Learn Feature) Changing the Source Name in the Display Window One Button Clear Clearing Learned Functions Renamed Source Names, and Setup Manufacturer Codes Each Component Control Area Operating a TV/digital TV ■Operating an LD player (D-TV/LDarea) ■ Operating a CD player (CD area) ■ Operating a CD recorder (CD-R area) or an MD recorder (MD TAPE area) ■ Operating an tape deck (MD/TAPE ■ Operating a tuner (TUNER area) ■Operating the component set in Å SET MENU Adjusting the Items on the SET MENU 1SPEAKER SET (speaker mode settings) 1A CENTER SP 1B MAIN SP 1C REAR L/R SP 1D REAR CT SP 1E LFE/BASS OUT 2 LOW FRQ TEST 1F MAIN LEVEL 4HP TONE CTRL (headphone tone control) 4 HP TONE CTRL 5CENTER GEQ (center graphic equalizer) 5CENTER GEQ 5 CENTER GEQ 6 INPUT RENAME 6 INPUT RENAME 7 I/O ASSIGNMENT 7A CMPNT-VINPUT 7B OPTICAL OUT 8INPUT MODE (initial input mode) 8INPUT MODE 7D COAXIAL IN 9 PARAM. INI 10 LFE LEVEL 10 LFE LEVEL 11 D-RANGE(dynamic range) 11 D-RANGE 12 SP DELAY TIME 12 SP DELAY TIME 13DISPLAY SET 13 DISPLAY SET 14 MEMORY GUARD 14 MEMORY GUARD ADJUSTING THE LEVEL OF THE EFFECT SPEAKERS SLEEP TIMER Setting the Sleep Timer Canceling the Sleep Timer SOUND FIELD PROGRAM PARAMETER EDITING What is a sound field Sound Field Program Parameters Changing Parameter Settings Resetting a Parameter to the Factory-setValue P04 ROCK CONCERT DIGITAL SOUND FIELD PARAMETER DESCRIPTIONS ■ LIVENESS Control Range 0 – ■ S. DELAY (Surround Delay) Control Range 0 – 49 msec (The range depends on the signal format.) ■ REV. TIME (Reverberation Time) Control Range 1.0 – 5.0 sec ■ REV. DELAY (Reverberation Delay) Control Range 0 – 250 msec ■ REV. LEVEL (Reverberation Level) For 6ch Stereo ■ CT LEVEL (Center Level) ■ RL LEVEL (Rear Left Level) ■ RR LEVEL (Rear Right Level) ■ RC LEVEL (Rear Center Level) TROUBLESHOOTING Page Page ■Tuner ■Remote control Refer to page GLOSSARY ■Virtual CINEMA DSP ■S VIDEO signal ■Component video signal ■PCM (Linear PCM) ■Sampling frequency and number of quantized bits SPECIFICATIONS