Yamaha HTR-5490 Changing Parameter Settings, Resetting a Parameter to the, Factory-setValue, P04 ROCK CONCERT, ■To reset all of the parameters to the factory-setvalues

SOUND FIELD PROGRAM PARAMETER EDITING

Changing Parameter Settings

You can enjoy good quality sound with the factory-set parameters. Although you do not have to change the initial settings, you can change some of the parameters to better suit the input source or your listening room.

Adjustments should be made with the remote control.

y

•We recommended that you edit the parameter while using a video monitor. It is easier to see the video monitor than it is to see the front panel display.

	TRANSMIT		RE–NAME CLEAR	LEARN
	SYSTEM	STANDBY		6CH INPUT
	POWER		SLEEP
	A	PHONO	TUNER	CD	REC
							AUDIO	+
	V-AUX	CBL/SAT	MD/TAPE	CD-R	DISC SKIP
								VOL
	D-TV/LD	VCR 1	VCR2/DVR	DVD				–
					LEVEL	+	SET MENU	MUTE
					TITLE		MENU		4
				SELECT	TV INPUT	TV VOL	A/B/C/D/E
1					CH	TV MUTE	CH
	POWER		POWER	AMP	–	SELECT	+		2
	TV		AV		PRESET		PRESET
				5	TEST	TV VOL	ON SCREEN	STEREO
	REC				RETURN	–	DISPLAY
								EFFECT
					HALL	CHURCH	JAZZ CLUB	ROCK
								CONCERT	3
					1	2	3	4
					ENTER-	TV	MONO	MOVIE
					TAINMENT	SPORTS	MOVIE	THEATER 1
					5	6	7	8
					MOVIE	/DTS		6.1/ES
					THEATER 2	SUR.	SELECT
					9	10	11	12
						0	+10	CHP/INDEX
1 Press AMP to select the							AMP
AMP mode.

2 Turn on the video monitor

ON SCREEN

4 Press u / d to select the	+
parameter.	TV VOL
CH	TV MUTE	CH
–		+
	SELECT
PRESET		PRESET
	TV VOL
	–
5 Press j / i to change the	+
parameter value.
	TV VOL
CH	TV MUTE	CH
–		+
	SELECT
		PRESET
	TV VOL
	–

y

•When you set the parameter to a value other than the factory- set value, an asterisk mark (*) appears by the parameter name on the video monitor.

6 Repeat steps 3 to 5 above as necessary to change other program parameters.

Memory back-up

The memory back-up circuit prevents the stored data from being lost even if this unit is set in the standby mode, the power cord is disconnected from the AC outlet, or the power supply is temporarily cut due to power failure. However, if the power is cut for more than one week, the parameter value you edited will return to the factory setting. If so, edit the parameter value again.

Resetting a Parameter to the

and press ON SCREEN repeatedly to select the full display mode.

DISPLAY

Factory-set Value

3 Select a DSP program you want to adjust.

HALL	CHURCH	JAZZ CLUB	ROCK
			CONCERT
1	2	3	4
ENTER-	TV	MONO	MOVIE
TAINMENT	SPORTS	MOVIE	THEATER 1
5	6	7	8
MOVIE	/DTS		6.1/ES
THEATER 2	SUR.	SELECT
9	10	11	12
	0	+10	CHP/INDEX

Program No. Program name

	P04 ROCK CONCERT
Cursor	≥ I N I T . D L Y … … … … 1 5 m s
		R O O M S I Z E … … … … 1 . 0
		L I V E N E S S … … … … … … … 5
		R E V . T I M E … … … … 1 . 6 s
		R E V . D E L A Y … … 1 2 0 m s
		R E V . L E V E L … … … … … 7 %
	Parameters		Parameter valves

Example of the parameter setting display

■To reset some of the parameters to the factory-set values

Select the parameter you want to reset. Then press and hold j/ iuntil the value temporarily stops at the factory- set value. The asterisk mark (*) by the parameter name disappears on the video monitor.

■To reset all of the parameters to the factory-set values

Use “9 PARAM. INI” on the SET MENU to reset all of the parameter values of all DSP programs within the selected group to the factory-set values (see page 60). This operation resets all of the parameter values of all DSP programs within that group to the factory-set values.

Notes

•The available parameters may be displayed on more than one OSD page for some of the programs. To scroll through pages, press u/ d.

•You cannot change parameter values when “14 MEMORY GUARD” on the SET MENU is set to ON. If you want to change the parameter values, set “14 MEMORY GUARD” to OFF (see page 62).

66