BASIC PLAYBACK
■Playing the Dolby Digital Matrix 6.1 or DTS ES softwarePress 6.1/ES to turn on the Dolby Digital Matrix 6.1 or DTS ES decoder to listen to the Dolby Digital Matrix 6.1 and DTS ES software with a rear center speaker.
6.1/ES
12
CHP/INDEX
V AUX VCR2/DVR VCR 1 | CBL/SAT D TV/LD DVD MD/TAPE CD R TUNER | CD PHONO VOLUME |
| ||||||
DSP |
|
|
|
|
|
|
|
| |
| MOVIE THEATER 1 |
|
|
|
| ||||
|
|
|
|
| |||||
|
| DIGITAL | Spectacle | 6.1 |
|
|
| ||
6.1/ES | A | L C | R | ||||||
|
| SP |
|
|
|
| RL RC | RR | |
|
|
|
|
|
|
| |||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The “ c ” indicator lights up.
The display changes AUTO → Disc6.1 → Mtrx6.1 → OFF each time the ES/6.1 button is pressed.
Notes
•No sound will be output from the rear center speaker if you have set “1C REAR L/R SP” on the SET MENU to NONE.
•The rear center speaker can be used when playing a 5.1- channel source also.
AUTO: | This mode automatically switches Dolby |
| Digital Matrix 6.1/DTS ES Matrix 6.1/DTS |
| ES Discrete 6.1 depending on the signal in |
| the input source that this unit can detect. |
| Rear center speaker does not work for 5.1 |
| channel sources. |
Disc6.1: | This mode can be selected only when the |
| source with DTS ES Discrete format has |
| been detected. |
Mtrx6.1: | This mode makes |
| input source through the Matrix 6.1 decoder. |
OFF: | Rear center speaker does not work in this |
| mode. |
Virtual CINEMA DSP
With the Virtual CINEMA DSP, you can enjoy all the DSP programs without rear speakers. It creates the virtual speakers to reproduce the natural sound field.
The sound field processing is changed to the Virtual CINEMA DSP mode according to the selected DSP program by setting “1C REAR L/R SP” on the SET MENU to NONE.
Note
•This unit is not set in the virtual CINEMA DSP mode even if “1C REAR L/R SP” is set to NONE in the following cases:
–when the 6ch Stereo, DOLBY DIGITAL Normal, Pro Logic
,DTS Normal or Neo: 6 program is selected;
–when the sound effect is turned off;
–when 6CH INPUT is selected as the input source;
–when
–when using the test tone; or
–when connecting the headphones.
SILENT CINEMA DSP
You can enjoy the powerful sound field as if there were actual speakers with the SILENT CINEMA DSP. You can listen to SILENT CINEMA DSP by connecting your headphones to the PHONES jack while the digital sound field processor is on. Enjoy all the DSP program using the headphones. The “SILENT” indicator lights up on the front panel display. (If the sound effect is off, you listen to the source with normal stereo reproduction.)
Note
•This unit is not set in the SILENT CINEMA DSP mode even if the sound effect is on;
– when
Press STEREO to turn off the sound effect for normal stereo reproduction.
Press STEREO again to turn the sound effect back on.
STEREO
STEREO
| or |
EFFECT | EFFECT |
| |
Front panel | Remote control |
Notes
•If you turn off the sound effect, no sound is output from the center speaker, rear speakers, rear center speaker and subwoofer.
•If you turn off the sound effect while a Dolby Digital or DTS signal is being output, the dynamic range of the signal is automatically compressed and the sounds of the center and rear speaker channels are mixed and output from the main speakers.
•The volume may be greatly reduced when you turn off the sound effect or if you set “11
You can display the information such as the type, format and sampling frequency of the signal input from the component connected to this unit.
1 Select the input source you want to obtain the information about by pressing an input selector button.
2 Press AMP to select the AMP mode.
3 Press STEREO to light STEREO.
4 Press d to display the information about the input signal.
+
TV VOL
CH | TV MUTE | CH | |
– | + | ||
SELECT | |||
PRESET |
| PRESET | |
| TV VOL |
| |
| – |
|
30