Yamaha HTR-5560 owner manual BGV background video function, To mute the sound

BASIC PLAYBACK

5 Start playback or select a broadcast station on the source component.

Refer to the operation instructions for the component.

6 Adjust the volume to the desired level.

The volume level is displayed digitally.

Example: –70 dB

Control range: VOLUME MUTE (minimum) to

0 dB (maximum)

The volume level indicator also shows the current volume level as a bar graph.

If desired, use BASS and TREBLE. These controls only effect the sound from the main speakers.

VOLUME

	+
or	VOLUME
	–

■BGV (background video) function

The BGV function allows you to enjoy video images from a video source together with sounds from an audio source. For example, you can enjoy listening to classical music while having beautiful scenery from a video source on the video monitor.

Select a source from the video group, then select a source from the audio group using the input selector buttons on the remote control. BGV selections cannot be made with INPUT l / hon the front panel.

CD MD/CD-R TUNER

DVD D-TV/CBL V-

VCR 1 VCR2/DVR

■To mute the sound

BASS TREBLE Remote control

1 Press MUTE on the

remote control.

MUTE

–	+	–	+
	Front panel

Notes

•If you increase or decrease the high-frequency or the low- frequency sound to an extreme level, the tonal quality from the center and rear speakers may not match that of the main left and right speakers.

•If you have connected a recording component to the VCR 1 OUT, VCR 2/DVR OUT, or MD/CD-R OUT jacks, and you notice distortion or low volume during playback of other components, try turning the recording component on.

7 Select a DSP program if desired.

Use PROGRAM l/ h(DSP program buttons on the remote control) to select a DSP program. See pages 29 to 33 for details about DSP programs. When using the remote control, press AMP before selecting a DSP program.

	HALL	JAZZ CLUB	ROCK	ENTER-
			CONCERT	TAINMENT
PROGRAM	1	2	3	4
or	TV	MONO	MOVIE	MOVIE
	SPORTS	MOVIE	THEATER 1	THEATER 2
	5	6	7	8
	/DTS		EX/ES	STEREO
	SUR.	SELECT
	9	0	+10	ENTER
				EFFECT
Front panel	Remote control

To resume the audio output, press MUTE again.

y

•You can also cancel mute by pressing VOLUME +/–, etc.

•During muting, the “MUTE” indicator flashes on the front panel display.

■When you have finished using this unit

1 Press STANDBY/ON (STANDBY on the remote control) to set this unit in the standby mode.

	STANDBY
STANDBY	or
/ON
Front panel	Remote control

24