Manuals / Brands / Home Audio / Stereo Receiver / Yamaha / Home Audio / Stereo Receiver

Yamaha htr-5890 Zone set, ■Zone 2 set F)ZONE2 SET, ■Zone 3 set G)ZONE3 SET, OFF, VAR, VAR, MAIN, Speakers B SP B, Output volume OUTPUT VOL, Output volume OUTPUT VOL

1 104

Download 104 pages, 4.07 Mb

SET MENU

■Zone set E)ZONE SET

E)ZONE SET

SP B;;;;;;MAIN

p/p :	Exit
</> :	Main

Speakers B SP B

Use to specify the location of speakers connected the SPEAKERS B terminals.

Choices: MAIN, ZONE B

•Select “MAIN” to turn on/off SPEAKERS A and B when the speakers connected to the SPEAKERS B terminals are set in the main room.

•Select “ZONE B” if the speakers connected to the SPEAKERS B terminals are set in another room. If SPEAKERS A is turned OFF and SPEAKERS B is turned ON, all the speakers including the subwoofer in the main room are muted and the unit outputs sound from SPEAKERS B only.

Notes

•If you select “ZONE B” and connect headphones to the PHONES jack on the unit, the sound is output from both headphones and SPEAKERS B.

•When a DSP program is selected, the unit automatically enters the Virtual CINEMA DSP mode.

■Zone 2 set F)ZONE2 SET

F)ZONE2 SET

OUTPUT VOL;;VAR.

ZONE2 AMP....OFF

p/p : Up/Down

</> : Select

Zone 2 amplifier ZONE2 AMP

Use to select how the ZONE 2 speakers will be amplified. Choices: ON, OFF

•Select “OFF” if you do not use Zone 2 speakers or if you connect your Zone 2 speakers through an external amplifier connected to this unit’s ZONE 2 OUTPUT jacks.

•Select “ON” to use this unit’s internal amplifier if you connect your Zone 2 speakers directly to this unit’s PRESENCE/ZONE 2 speaker terminals.

■Zone 3 set G)ZONE3 SET

G)ZONE3 SET

OUTPUT VOL;;VAR.

p/p :	Exit
</> :	Select

Output volume OUTPUT VOL

Use to select how the volume control will operate with regard to the ZONE 3 OUTPUT jacks.

Choices: VAR., FIX

•Select “VAR.” to adjust the ZONE 3 OUTPUT volume simultaneously with VOL –/+ on the remote control.

•Select “FIX” to fix the ZONE 3 OUTPUT volume

level to a standard line level.

Output volume OUTPUT VOL

Use to select how the volume control will operate with regard to the ZONE 2 OUTPUT jacks.

Choices: VAR., FIX

•Select “VAR.” to adjust the ZONE 2 OUTPUT volume simultaneously with VOL –/+ on the remote control.

•Select “FIX” to fix the ZONE 2 OUTPUT volume level to a standard line level.

64

Contents

Page IMPORTANT SAFETY INSTRUCTIONS FCC INFORMATION (for US customers) CAUTION: READ THIS BEFORE OPERATING YOUR UNIT CONTENTS FEATURES Built-in 7-channelpower amplifier Sound field features Sophisticated AM/FM tuner Other features GETTING STARTED Supplied accessories Installing batteries in the remote control Notes on batteries CONTROLS AND FUNCTIONS Front panel CPHONES (SILENT CINEMA) jack DSPEAKERS A/B ESTRAIGHT/EFFECT FPROGRAM GTONE CONTROL Remote control HSELECT k/n IVOL +/– JAMP/SOURCE/TV AMP: SOURCE: Using the remote control ■Handling the remote control Front panel display Page Rear panel SPEAKER SETUP Speaker placement Front speakers (FR and FL) Center speaker (C) Surround speakers (SR and SL) Speaker connections ■Connecting to PRESENCE/ZONE 2 or PRESENCE speaker terminals ■Banana plug connections Front speakers (A) Left ■FRONT terminals ■CENTER terminals ■SURROUND terminals ■SUBWOOFER jack ■SURROUND BACK terminals CONNECTIONS ■Cable indications ■Analog jacks ■Digital jacks ■Video jacks Connecting video components ■Connections for DVD playback ■Connecting to the MULTI CH INPUT jacks ■Connections for other video components ■VIDEO AUX jacks (on the front panel) Connecting audio components ■Connections for audio components ■Connecting a turntable ■Connecting to an external amplifier Connecting the antennas ■Connecting the AM loop antenna Connecting the power supply cord ■Connecting the AC power cord ■AC OUTLET(S) (SWITCHED) ■Memory back-up Speaker impedance setting Turning on the power AUTO SETUP Introduction Optimizer microphone setup Starting the setup If you selected “AUTO” in step If you selected “STEP” in step If you selected “RELOAD” in step ■Troubleshooting for auto setup procedure After auto setup Warning message BASIC SETUP Using BASIC MENU 8After you have finished the settings, press n, then press l / h to select: 9Press n to select CHECK OK?, then press l / h to select: (when “NO” is selected) Memory back-up PLAYBACK Basic operations Selecting sound field programs ■Front panel operation ■Remote control operation Additional operations ■To adjust the tone ■To mute the sound ■To listen with headphones (“SILENT CINEMA”) ■Selecting the MULTI CH INPUT ■Enjoying multi-channelsoftware in 6.1/7.1 channel surround ■Enjoying 2-channelsoftware in surround ■Listening to high fidelity stereo sound with PURE DIRECT with Direct Stereo ■Night listening modes ■Downmixing to 2 channels ■Listening to unprocessed input signals ■Virtual CINEMA DSP ■Playing video sources in the background Selecting input modes ■Displaying information about the input source TUNING Automatic and manual tuning ■ Automatic tuning ■Manual tuning Presetting stations ■Automatically presetting FM stations Automatic preset tuning options ■Manually presetting stations Selecting preset stations Exchanging preset stations RECORDING ■Special considerations when recording DTS software SOUND FIELD PROGRAM DESCRIPTIONS For movie/video sources Page Page For music sources ADVANCED OPERATIONS Selecting the OSD mode Using the sleep timer ■Setting the sleep timer ■Canceling the sleep timer Using the test tone SET MENU ■AUTO SETUP ■MANUAL SETUP Using SET MENU Using SOUND MENU Speaker set Surround left/right speakers SURR L/R SP Surround back speakers SURR B L/R SP SMLx2 Presence speakers PRESENCE SP YES Speaker level ■Speaker distance C)SP DISTANCE ■Graphic equalizer D)GRAPHIC EQ ■Low-frequencyeffect level E)LFE LEVEL Dynamic range ■Low frequency test G)LOW FRQ. TEST ■Headphone tone control H)HP TONE CTRL Audio set ■Presence/surround back channel select Using INPUT MENU ■ Input/output assignment Input mode Input rename ■Multi Channel Input D)MULTI CH INPUT Using OPTION MENU Display set Memory guard ■Parameter initialization C)PARAM. INI ■Speaker impedance setting Zone set ■Zone 2 set F)ZONE2 SET ■Zone 3 set G)ZONE3 SET REMOTE CONTROL FEATURES Control area ■Controlling this unit ■Controlling other components ■Controlling optional components Setting remote control codes Function Code 4Press ENTER 6Press ENTER to set the number 7Press LEARN again to exit from the setup mode Programming codes from other remote controls (Learn) 4 Press LEARN using a ballpoint pen or similar 7 Press LEARN again to exit the learning object mode 5Press the button for which you want to program the new function display window Using the Macro feature ■Macro operations ■Programming macro operations Clearing function sets Clearing individual functions ■Clearing a learned function ■Clearing a macro function Controlling each component ZONE 2/ZONE Zone 2/Zone 3 connections ■System configuration and connection example Remote controlling Zone 2/Zone ■To control Zone 2/Zone ■To enable Zone mode on the remote control ■Turning this unit to either on or standby ■Special considerations for DTS software EDITING SOUND FIELD PARAMETERS What is a sound field ■Elements of a sound field Changing parameter settings ■Resetting parameters to the factory values SOUND FIELD PARAMETER DESCRIPTIONS ■DSP LEVEL ■INIT. DLY/P. INIT. DLY (Initial delay) ■ROOM SIZE/P. ROOM SIZE (Room size) ■LIVENESS ■S. INIT. DLY (Surround initial delay) ■S. ROOM SIZE (Surround room size) ■S. LIVENESS (Surround liveness) ■SB INI. DLY (Surround back initial delay) ■REV.TIME (Reverberation time) ■REV.DELAY (Reverberation delay) ■REV. LEVEL (Reverberation level) ■DIALG.LIFT (Dialog lift) For 7ch Stereo ■CT LEVEL (Center level) ■SL LEVEL (Surround left level) ■SR LEVEL (Surround right level) TROUBLESHOOTING ■ General goes off one side can be heard Only the center speaker outputs Dolby Digital or DTS sources cannot be or DTS indicator in the front panel up.) ■Tuner ■Remote control GLOSSARY Audio formats ■Dolby Digital ■Dolby Digital EX ■Dolby Pro Logic Sound field programs ■CINEMA DSP ■SILENT CINEMA Audio information ■ITU-R ■LFE 0.1 channel ■Sampling frequency and number of quantized bits Video signal information ■Component video signal ■Composite video signal ■S-videosignal SPECIFICATIONS LIST OF REMOTE CONTROL CODES MD RECORDER SATELLITE TUNER RECEIVER (TUNER) TAPE DECK Page VCR