4Press the buttons for the functions you want to include in the macro operation in sequence.

You can set up to 10 steps (10 functions). After you have set 10 steps, “FULL” appears and the remote control automatically exits the macro mode.

SYSTEM

POWER POWER STANDBY POWER

TV

AV

 

 

MCR 2: AV POWER

A

B

2

SLEEP

 

INPUT MODE

 

PHONO

TUNER

CD

MULTI CH IN

 

V-AUX

CBL/SAT

MD/TAPE

CD-R

 

DTV

VCR 1

DVR/VCR2

DVD

 

 

 

 

1

MCR 1: DVD

FREQ/RDS

EON

MODE PTY SEEK START

 

REC

 

 

 

 

DISC SKIP

 

 

3

MCR 3: h

OFF ON

MACRO

LEARN CLEAR RE–NAME

 

Indicates the number of macro steps entered

Flashes alternately so you can set the next step

Note

•The macro operation may not work for a component which takes time to start up.

•To change the selected source component, press SELECT k/ n. Pressing the input selector buttons will program a macro step, whereas SELECT k/nonly changes the selected component and corresponding component control area.

5Press MACRO again when the operation sequence you want to program is complete.

Note

“ERROR” appears in the display window if you press a button not indicated in the respective step, or if you press more than one button simultaneously.

Memory back-up

If the remote control is without batteries for more than 2 minutes, or if exhausted batteries remain in the remote control, the contents of the memory may be cleared. If the memory is cleared, insert new batteries, set up the remote control code(s) and program any acquired functions that may have been cleared.

REMOTE CONTROL FEATURES

Clearing function sets

You can clear all changes made in each function set, such as learned functions, renamed source names and setup remote control codes.

1Set AMP/SOURCE/TV to AMP or SOURCE.

AMP

SOURCE

TV

2Press CLEAR by using a ballpoint pen or similar object.

“CLEAR” appears in the display window.

CLEAR

Note

If you do not complete each of the following steps within 30 seconds, the clearing mode will be automatically canceled. In this case, press CLEAR again.

3Press k / n to select the clear mode.

L:DVD

(L: name of a component)

 

Clears all learned functions in the respective

 

component control area. Press an input selector

 

button to select the component.

L:AMP

Clears all learned functions for this unit’s control

 

area.

L:ALL

Clears all learned functions.

M:ALL

Clears all programmed macros

RNAME

Clears all renamed source names.

FCTRY

Clears all remote functions and returns the remote

 

to the factory settings.

4Press and hold CLEAR again for about 3 seconds.

“WAIT” appears in the display window. If clearing was successful, “C:OK” appears in the display window.

CLEAR

y

Once you have cleared a learned function for a button, the button reverts to the factory setting (or to the manufacturer setting, if you have set remote control codes).

Note

“L:ALL” and “FCTRY” may take about 30 seconds to complete.

OPERATION

ADVANCED

 

 

73