ZONE 2/ZONE 3
This unit allows you to configure a
Only analog signals are sent to the second and third rooms. Any source you want to listen to in the second or third room must be connected using the analog (AUDIO L/R) input jacks on this unit.
Zone 2/Zone 3 connections
You need the following additional equipment to use the
•An infrared signal receiver in the second and/or third room.
•An infrared emitter in the main room. This emitter transmits the infrared signals from the remote control in the second and/or third room to the main room (to a CD player or DVD player, for example).
•An amplifier and speakers for the second and/or third room.
y
•Since there are many possible ways to connect and use this unit in a
•Some YAMAHA models are able to connect directly to the CONTROL OUT jack on this unit. If you own these products, you may not need to use an infrared emitter. Up to six YAMAHA components can be connected as shown.
OUT | IN | OUT | IN | CONTROL OUT | ||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
This unit
■System configuration and connection example
Using external amplifiers
To use an external amplifier in Zone 2, set ZONE 2 AMP to “OFF” in SET MENU.
|
|
| ZONE 3 AUDIO OUT | |
|
| ZONE 2 AUDIO OUT |
| |
|
| SP OUT |
| |
|
| Amplifier | Amplifier | |
| MONITOR OUT |
|
| |
CD player | This unit | Remote control | Remote control | |
(or other component) | ||||
MAIN |
| |||
| SYSTEM ZONE 2 |
| ||
| AUDIO IN | ZONE 3 | Infrared signal | |
|
| Infrared signal | ||
|
| receiver | receiver | |
Infrared emitter |
|
| ||
| Main room | Second room | Third room | |
| REMOTE OUT | ZONE 2 REMOTE IN |
| |
|
|
| ZONE 3 REMOTE IN | |
Notes
•When not using the main room, turn down the volume of this unit in the main room. Adjust the Zone 2/Zone 3 volume by using the amplifier in the second/third room.
•To avoid unexpected noise, DO NOT USE the Zone 2/Zone 3 feature with CDs encoded in DTS.
OPERATION | ADVANCED |
|
|
77