Basic setup
The “BASIC SETUP” feature is a useful way to set up your system quickly and with minimal effort.
Notes
•Make sure you disconnect your headphones from this unit.
•If you wish to configure this unit manually using more precise adjustments, use the detailed parameters in “SOUND MENU” (see page 45).
•Altering any parameters in “BASIC SETUP” resets all parameters manually adjusted in “SOUND MENU” (see page 45).
•Initial settings are indicated in bold under each parameter.
•Press H RETURN on the remote control to return to the previous menu level.
1Press D AMP on the remote control.
2Press P MENU.
“BASIC SETUP” appears in the front panel display.
.BASIC SETUP
3Press G ENTER to enter “BASIC SETUP”.
“ROOM” appears in the front panel display.
ROOM: S >M L
4Press G l/ hto select the desired setting.
Select the size of the room where you have installed your speakers. In general, the room sizes are defined as follows:
Choices: S, M, L
[U.S.A. and Canada models]
S (small) | 16 x 13 ft, 200 ft2 (4.8 x 4.0 m, 20 m2) |
M (medium) | 20 x 16 ft, 300 ft2 (6.3 x 5.0 m, 30 m2) |
L (large) | 26 x 19 ft, 450 ft2 (7.9 x 5.8 m, 45 m2) |
[Other models] | |
S (small) | 3.6 x 2.8 m, 10 m2 |
M (medium) | 4.8 x 4.0 m, 20 m2 |
L (large) | 6.3 x 5.0 m, 30 m2 |
5Press G nto select “SUBWOOFER” and then G l/ hto select the desired setting.
SUBWOOFER..YES
Choices: YES, NONE
•Select “YES” if you have a subwoofer in your system.
•Select “NONE” if you do not have a subwoofer in your system.
6Press G nto select “SPEAKERS” and then G l/ hto select the number of speakers
connected to this unit.
SPEAKERS..5spk
Choice Display | Speakers | |||
2spk | L | R | Front L/R | |
|
| |||
3spk | L C R | Front L/R, Center | ||
|
| |||
4spk | L | R | Front L/R, Surround L/R | |
SL | SR | |||
|
| |||
5spk | L C R | Front L/R, Center, Surround L/R | ||
SL | SR | |||
|
| |||
PREPARATION
English