XM Satellite Radio tuning

Setting XM Satellite Radio preset channels

You can use this feature to store up to 40 XM Satellite Radio channels (A1 to E8: 8 preset channel numbers in each of the 5 preset channel groups). You can then recall any preset channel easily by selecting the preset channel group and number as described in “Preset Search mode” on page 39.

1Search for a channel you want to set as a preset channel by using one of the XM Satellite Radio search modes.

See “Basic XM Satellite Radio operations” on page 38 for details.

2Press 6MEMORY (or H XM MEMORY).

The MEMORY indicator flashes in the front panel display for approximately 10 seconds.

Note

You must proceed to and carry out steps 3 through 5 while the MEMORY indicator is flashing in the front panel display.

3Press 4CATEGORY (or G A-E/CAT.l/ h) repeatedly to select a preset channel group (A to E) while the MEMORY indicator is flashing.

The preset channel group letter appears in the front panel display.

Flashes

MEMORY

C[043] XMU

Currently selected preset channel group

4Press 5PRESET/TUNING/CH l/ h(or

G PRESET/CH k/ n) repeatedly to select a preset channel number (1 to 8) while the MEMORY indicator is flashing.

The preset channel number appears in the front panel display.

Flashes

MEMORY

C5 [043] XMU

Currently selected preset channel number

5Press 6MEMORY (or H XM MEMORY) to set the selected XM Satellite Radio channel as a preset channel while the MEMORY indicator is flashing.

A colon (:) appears next to the preset channel number for confirmation, and the MEMORY indicator turns off in the front panel display.

C5:[043] XMU

Colon (:)

Note

Once you set a new preset channel, the one previously stored in the same preset channel group and number is cleared.

40 En