2Press G l/ hto adjust the effect level while “NIGHT:CINEMA” or “NIGHT:MUSIC” is displayed in the front panel display.

Choices: MIN, MID, MAX

•Select “MIN” for minimum compression.

•Select “MID” for standard compression.

•Select “MAX” for maximum compression.

y

“NIGHT:CINEMA” and “NIGHT:MUSIC” adjustments are stored independently.

Notes

•You cannot use the night listening modes in the following cases:

–when the component connected to the MULTI CH INPUT jacks is selected as the input source.

–when headphones are connected to the PHONES jack.

•The night listening modes may vary in effectiveness depending on the input source and surround sound settings you use.

■Selecting audio input jacks

(AUDIO SELECT)

This unit comes with a variety of input jacks. Use this feature (audio input jack select) to switch the input jack assigned to an input source when more than one jacks are assigned to an input source.

y

•We recommend setting audio input jack select to “AUTO” in most cases.

•You can adjust the default audio input jack select of this unit by using “AUDIO SELECT” in “OPTION MENU” (see page 50).

Press EAUDIO SELECT (or B AUDIO SEL)

repeatedly to select the desired Audio input jack select setting.

 

 

 

 

DVR V-AUX DTV/CBL DVD MD/CD-R TUNER CD XM

 

 



 

A.SEL:AUTO

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Audio input

 

jack

 

 

 

 

 

 

 

 

 

select setting

AUTO

Automatically selects input signals in the

 

 

following order:

 

 

(1) Digital signals

 

 

(2) Analog signals

ANALOG

Selects only analog signals. If no analog

 

 

signals are input, no sound is output.

Note

This feature is not available when no digital input jack are assigned to the currently selected input source.

Playback

■Adjusting the tonal quality

Use this feature to adjust the balance of bass and treble for the front left and right speaker channels.

Press 0TONE CONTROL repeatedly to select

“BASS” or “TREBLE” and then press

APROGRAM l/ hto adjust the corresponding frequency response level.

•Select “BASS” to adjust the low-frequency response.

•Select “TREBLE” to adjust the high-frequency response.

Notes

•Speaker and headphone adjustments are stored independently.

•If you increase or decrease the high-frequency or low-frequency sound to an extreme level, the tonal quality of the surround speakers may not match that of the front left and right speakers.

■Adjusting speaker levels during

playback

You can adjust the output level of each speaker while listening to a music source.

Note

This operation will override the level adjustment made in “SP LEVEL” (see page 46).

1Press D AMP and then press F LEVEL repeatedly to select the speaker you want to adjust.

Display

Adjusted speaker

FRONT L

Front left speaker

 

 

FRONT R

Front right speaker

 

 

CENTER

Center speaker

 

 

SUR.L

Surround left speaker

 

 

SUR.R

Surround right speaker

 

 

SWFR

Subwoofer

 

 

y

Once you press F LEVEL on the remote control, you can also select the speaker by pressing G k/ n.

2Press G l/ hon the remote control to adjust the speaker output level.

The control range is from –10 dB to +10 dB.

y

You can press 4A/B/C/D/E to select a speaker and then

5PRESET/TUNING/CH l/ hto adjust the speaker output level.

OPERATION

BASIC

 

 

English

29 En