Yamaha HTR-6030 32 En, sources (surround decode mode), ■Editing sound fields parameters, ■Selecting decoders for 2-channel

Sound field programs

■Selecting decoders for 2-channel

sources (surround decode mode)

Signals input from 2-channel sources can also be played back on multi-channels.

Press D AMP and then press J SUR. DECODE repeatedly to select a decoder.

You can select from the following decoders depending on the type of source you are playing and your personal preference.

STANDARD	Functions
PRO LOGIC	Dolby Pro Logic processing for any
	sources
PLII Movie	Dolby Pro Logic II processing for
	movie sources
PLII Music	Dolby Pro Logic II processing for
	music sources
PLII Game	Dolby Pro Logic II processing for
	game sources
Neural	Neural Surround processing for any
	sources

■Editing sound fields parameters

You can enjoy good quality sound with the factory preset parameters. Although you do not have to change the initial settings, you can change some of the parameters to better suit the input source or your listening room.

1While listening to a source, press D AMP and then press G k/ nto select the desired

parameter.

2Press G l/ hto change the parameter value.

Note

You cannot change parameter values when “MEM. GUARD” in “OPTION MENU” is set to “ON” (see page 50).

y

Initial settings are indicated in bold under each parameter.

For Pop/Rock, Hall, Jazz, Game, TV Sports, Movie Spacious and Movie Dramatic:

DSP level DSP LEVEL

Function:	Adjusts the effect level.
Choices:	MIN, MID, MAX
For PRO LOGIC II Music:
Panorama PANORAMA
Function:	Sends stereo signals to the surround
	speakers as well as the front speakers
	for a wraparound effect.
Choices:	OFF, ON
Dimension DIMENSION
Function:	Gradually adjusts the sound field
	either towards the front or towards the
	rear.
Control range:	–3 (towards the rear) to +3 (towards
	the front), initial setting is STD
	(standard).
Center width CT WIDTH
Function:	Adjusts the center image from all
	three front speakers to varying
	degrees. A larger value adjusts the
	center image towards the front left and
	right speakers.
Control range:	0 (center channel sound is output only
	from center speaker) to 7 (center
	channel sound is output only from
	front left and right speakers), initial
	setting is 3.
For Music Enh. 2ch and Music Enh. 5ch
Effect level
Function:	Adjusts the effect level.
Choices:	LOW, HIGH

32 En