FM/AM tuning

Selecting preset stations

You can tune into any desired station simply by selecting the preset station group and number under which it was stored.

y

When performing this operation with the remote control, press

CTUNER to select “TUNER” as the input source.

1Press 4A/B/C/D/E (or G A-E/CAT.l/ h) repeatedly to select the desired preset station group (A to E).

The preset station group letter appears in the front panel display and changes each time you press the button.

2Press 5PRESET/TUNING/CH l/ h(or

G PRESET/CH k/ n) to select the desired preset station number (1 to 8).

The preset station group and number appear in the front panel display along with the station band and frequency.

E1:FM 87.50MHz

y

You can select the desired preset station number (1 to 8) directly by pressing the numeric buttons on the remote control.

Exchanging preset stations

You can exchange the assignments of two preset stations with each other. The example below describes the procedure to exchange preset station “E1” with “A5”.

1Select preset station “E1” using 4A/B/C/D/E and 5PRESET/TUNING/CH l/ h.

See “Selecting preset stations” on this page.

2Press and hold 2PRESET/TUNING for more than 3 seconds.

“E1” and the MEMORY indicator flash in the front panel display.

Flashes

MEMORY

E1:FM 87.50MHz

Flashes

3Select preset station “A5” using 4A/B/C/D/ E and 5PRESET/TUNING/CH l/ h.

“A5” and the MEMORY indicator flash in the front panel display.

See “Selecting preset stations” on this page.

Flashes

MEMORY

A5:FM 90.60MHz

Flashes

4Press 2PRESET/TUNING again.

“EDIT E1–A5” appears in the front panel display and the assignments of the two preset stations are exchanged.

36 En