Use this menu to manually adjust any speaker settings or compensate for video signal processing delays when using LCD monitors or projectors.
■Speaker settings A)SPEAKER SET
Use this feature to manually adjust any speaker settings.
FRONT B speaker setting FRONT B
Use this feature to select the location of the front speakers connected to the FRONT B terminals.
Choices: FRONT, ZONE B
•Select “FRONT” to turn FRONT A and B on and off when the FRONT B speakers are set in the main zone.
•Select “ZONE B” if the speakers connected to the FRONT B terminals are set in another zone. If FRONT A is turned off and FRONT B is turned on, all the speakers including the subwoofer in the main zone are muted and this unit outputs sound at the FRONT B terminals only.
Notes
•If you connect headphones to the PHONES jack of this unit, the sound is output from both headphones and the FRONT B terminals when “FRONT B” is set to “ZONE B”.
•If a DSP program is selected when “FRONT B” is set to “ZONE B”, this unit automatically enters the Virtual CINEMA DSP mode (see page 33).
Set menu
Woofer section of a speaker is 16 cm (6.5 in) or larger: large
Woofer section of a speaker is smaller than 16 cm (6.5 in): small
Front speakers FRONT
Choices: SMALL, LARGE
When the front speakers are large
Select “LARGE” (large).
When the front speakers are small
Select “SMALL” (small).
Note
When “BASS OUT” is set to “FRNT” (see page 46), you can select only “LARGE” in “FRONT”. If the value of “FRONT” is set to a setting other than “LARGE” in advance, this unit automatically changes the value to “LARGE”.
Center speaker CENTER
Choices: NONE, SML, LRG
When the center speaker is large
Select “LRG” (large).
When the center speaker is small
Select “SML” (small).
When you do not use the center speaker
Select “NONE” (none). The center channel signals are directed to the front left and right speakers.
Surround left/right speakers SUR. LR Choices: NONE, SML, LRG
When the surround speakers are large
Select “LRG” (large).
When the surround speakers are small
Select “SML” (small).
When you do not use the surround speakers
Select “NONE” (none). This unit is set to the Virtual CINEMA DSP mode (see page 33).
OPERATION | ADVANCED |
|
|
English