■Input rename B)INPUT RENAME

Use this feature to change the name of the input source that appears in the front panel display.

The following is an example where “DVD” is renamed “My DVD”.

DVR V-AUX DTV/CBL pDVD MD/CD-R TUNER CD XM

DVD My DVD

1Press one of the input selector buttons (C) or A MULTI CH IN to select the input

source you want to change the name of.

MULTI CH IN

CD MD/CD-R TUNER

DVD DTV/CBL DVR

V-AUX XM

2Press D AMP and then press G l/ hon the remote control to place the “_” (underscore) under the space or the character you want to edit.

3Press G k/ nto select the character you want to use and then press G l/ hto move

to the next space.

Notes

•You can use up to 8 characters for each input.

•Press G nto change the character in the following order, or press G kto go in the reverse order:

A to Z, a space, 0 to 9, a space, a to z, a space, symbols (#, *, –, +, etc.)

4Repeat steps 1 through 3 to rename each input source.

5Press P MENU to exit from “INPUT RENAME”.

Set menu

■Volume trim C)VOLUME TRIM

Use this feature to adjust the level of the signal input at each jack. This is useful if you want to balance the level of each input source to avoid sudden changes in volume when switching between input sources.

Choices: CD, MD/CD-R, TUNER, DVD, DTV/CBL, V-AUX, DVR, MULTI CH IN,

XM RADIO Control range: –6.0 to +6.0 dB Control step: 1.0 dB

Initial setting: 0.0 dB

■Decoder mode D)DECODER MODE

Decoder select mode

Use this feature to designate the default decoder mode for the input sources connected to the DIGITAL INPUT jacks when you turn on the power of this unit.

Choices: AUTO, LAST

•Select “AUTO” if you want this unit to automatically detect the type of input signals and select the appropriate decoder mode.

•Select “LAST” if you want this unit to automatically select the last decoder mode used the connected input source.

DTS decoder prioritize setting

Choices: AUTO, DTS

•Select “AUTO” if you want this unit to automatically detect input signal types and select the appropriate input mode.

•Select “DTS” when you play back a DTS-CD.

■Multi channel input setup

E)MULTI CH SET

BGV BGV

Use this feature to select the video source played in the background of the sources input from the MULTI CH INPUT jacks.

Choices: LAST, DVR, V-AUX, DTV/CBL, DVD

y

Select “LAST” to set this unit to automatically select the last selected video source as the background video source.

OPERATION

ADVANCED

 

 

English

49 En