Front & Rear Panels
MG32/14FX, MG24/14FX
18
■
TALK BACK Section
1
MIC Jack
An unbalanced XLR input jack, for connection to a talkback
microphone.
This jack does not supply phantom power.
2
Talkback Control
Adjusts the talkback level.
3
AUX1-4 Switch
If this switch is on ( ), the mixer feeds the signal from the
MIC jack into AUX buses 1 to 4.
4
ST Switch
If this switch is on ( ), the mixer feeds the signal from the
MIC jack to the ST bus.
■
LAMP Jack
LAMP Jack
An XLR3 pin-type output jack, for connection to a lamp.
Supported lamps: 12V (AC or DC), max. 5W.
Supplies 12V to Pins 2 and 3. Pin 1 is not con-
nected.
1
2
3
4
NOTE
IMPORTANT: Please read carefully before con-
necting a lamp.
• Do not use a lamp that grounds Pin 2 or Pin 3 to the
shell (body).
Use of the wrong lamp type may result in damage
to the mixer.
Recommended lamps: Littlite's X-HI series of goose-
neck lamps.
• Do not inadvertently connect a talkback micro-
phone to the LAMP jack.
A microphone may sustain damage if connected to
this jack.
NOTE
Wrong lamp type
12
3
12
3
Correct lamp type
12
3
Shell
MG32-14FX.fm Page 18 Wednesday, May 19, 2004 2:00 PM