Description of the Device
NUAGE FADER Operation Manual 17
WORKSPACE Section
Overview
This section is for recalling Workspaces. To create and
lock Workspaces, edit them in Nuendo.
Controls and Functions

[WORKSPACE 1] – [WORKSPACE 4]

Recalls “Workspace 1” – “Workspace 4.” The button lights
when held down. You can recall up to four Workspaces.
CONTROL ROOM Section
Overview
This section is for operating the Control Room functions.
To use this section, make sure that Control Room is set to
on in Nuendo and that the channels you need have been
created, then configure the input/output routings for those
channels.
The [CONTROL ROOM LEVEL knob] is for adjusting the
Control Room level. However, when [PHONES] is on, you
can adjust the Phones level by this knob.
If you have configured multiple DAW software programs
and operate them by selecting the DAW SELECT Section
(page 19), the [DOWN MIX], [DIM], [CONTROL ROOM
LEVEL knob] and [PHONES] controls will always be
applied to the Control Room of DAW A. In other words, this
section is not affected by the DAW software selection.
Controls and Functions

[DOWN MIX]

Selects the Downmix presets one by one.

[DIM]

Turns Dim on (lit) and off (dim). When this is on, the
Control Room audio level is lowered. When this is off, the
previous level is restored. You can set the Dim level on
Nuendo.
Lamp Description
Lit A Downmix preset other than the first has been
selected.
Dim The first Downmix preset has been selected.