Yamaha nuage fader AUTOMATION Section , WORKSPACE Section , CONTROL ROOM Section , PAGE CONTROL Section, USER ASSIGNABLE Section DAW SELECT Section UNIT LINK Section FLIP Section, MODIFIER Section

Appendix
NUAGE FADER Operation Manual 28
AUTOMATION Section
WORKSPACE Section
CONTROL ROOM Section
PAGE CONTROL Section
USER ASSIGNABLE Section
DAW SELECT Section
UNIT LINK Section
FLIP Section
MODIFIER Section
*1: Control Room functions normally control Nuendo as the main
DAW (i.e., DAW A). In order, therefore, to output Pro Tools audio
signals from the Nuage system, the Pro Tools audio interface’s
outputs must be connected to the Nuage system audio
interface’s inputs, and the appropriate input and output settings
must be made on Nuendo’s VST Connections window (selected
from the Devices menu).
[CUES] Not applicable.
[INSERT]
[DYN]
[EQ]
[Sub parameter 1] These buttons are used to select
sends A – E. The button indicator of
the currently selected send lights
up.
[Sub parameter 2]
[Sub parameter 3]
[Sub parameter 4]
[Sub parameter 5]
[Sub parameter 6] Not applicable.
[Sub parameter 7]
[Sub parameter 8]
[ON] Not applicable.
[LATCH]
[PREVIEW]
[PUNCH]
[WORKSPACE 1] This button is used to make the Mix
window the active window.
[WORKSPACE 2] This button is used to make the Edit
window the active window.
[WORKSPACE 3] This button is used to open and
close the Transport window. Its
indicator lights up while the
Transport window is open.
[WORKSPACE 4] Not applicable.
[DOWNMIX] These controllers are used to
operate the DAW A Nuendo.*1
[DIM]
[CONTROL ROOM LEVEL
knob]
[SOLO CLEAR]
[LISTEN]
[METER RESET]
[PHONES]
[PAGE] Not applicable.
[ESC]
[ENTER]
[]/[]/[]/[]
(up/left/down/right)
[F1] – [F3] Not applicable.
[DAW A] – [DAW C] These buttons perform the same
tasks as when working with
Nuendo.
[MAIN DISP]
[UNIT LINK] Not applicable.
[KNOB 1] This knob switches Pro Tools to Flip
mode. When in this mode, the
knob’s LED will be lit.
[KNOB 2] This button is used in conjunction
with other buttons to modify function
operation. This corresponds to the
Option modifier key found on Mac
keyboards.
[SHIFT] This button is used in conjunction
with other buttons to modify function
operation. This corresponds to the
Shift modifier key found on Mac
keyboards.
[CTRL] This button is used in conjunction
with other buttons to modify function
operation. This corresponds to the
Control modifier key found on Mac
keyboards.
[ALT] This button is used in conjunction
with other buttons to modify function
operation. This corresponds to the
Command modifier key found on
Mac keyboards.