Appendix

NUAGE FADER Operation Manual 27

Button Functions

CHANNEL STRIP Section

CHANNEL VIEW CONTROL Section

SECTION CONTROL Section

[Fader] The faders are used to set channel
levels, or to set send levels in Flip
mode.
[Touch slider bar] Slide to scroll the channels.
[Channel color] Not applicable.
[Channel name display] This area displays the channel strip
name, the Automation mode, the
send channel, and other related
information.
[SOLO] This button is used to solo
channels.
[MUTE] This button is used to mute
channels.
[SEL] This button is used to select
channels.
[MON] Not applicable.
[REC] This button is used to arm Pro Tools
channels for recording. The button
indicators of channels that are
armed flash. The button indicators
of armed channels light
continuously when recording starts.
[W] This button is used to cycle through
Touch, Latch, Write, and Off
Automation modes.
The lighting pattern of the [W] and [R] buttons indicates various
Automation mode states as follows.
Automation mode [R] [W]
Off Off Off
Read On Off
Touch, Latch, or Write Off Flashing (standby)
/On (writing)
Trim + Read On Flashing
Trim + Touch, Latch, Flashing (standby) On
or Write /On (writing)
[R] This button is used to turn
Automation Read mode on and off.
Refer to the description of the [W]
button for details regarding its
lighting pattern.
[e] (edit) Not applicable.
[Multi function knob]
(upper)
[Multi function button A]/
[Multi function button B]
(upper)
[Multi function knob]
(lower)
This knob is used to set the pan or
send level.
[Multi function button A]/
[Multi function button B]
(lower)
Not applicable.
[CHANNEL VIEW memory
1] – [CHANNEL VIEW
memory 4]
Not applicable.
[INPUT]
[AUDIO]
[OUTPUT]
[FX]
[GROUP]
[OTHERS]
[EVENT ON TR]
[EVENT CYCLE]
[PLAYING CH]
[ LOCK] (lock left)
[ LOCK] (lock right)
[LINK]
[HIDE]
[SEL CH]
[EXPAND]
[ALL CH]
[] (left) This key is used to scroll to the left
one channel at a time. If pressed
when [BANK] is on, the channels
will be scrolled one bank at a time.
[BANK] If the [] or [] key is pressed
when this key is on (lit), the
channels will be scrolled one bank
at a time to the left or right.
[] (right) This key is used to scroll to the right
one channel at a time. If pressed
when [BANK] is on, the channels
will be scrolled one bank at a time.
[METER] Not applicable.
[] (down)
[] (up)
[QUICK CTRL]
[PRE]
[ROUTING]
[PAN] When this button is pressed, the
Encoders work as channel panpots.
Its indicator lights up when it’s
pressed.
[SENDS] When this button is pressed, the
Encoders work as send level
controls. Its indicator lights up when
it’s pressed, and send A is selected
automatically.