Description of the Device
NUAGE FADER Operation Manual 20
UNIT LINK Section
Overview
This section is for turning on and off UNIT LINK. When you
connect multiple Nuage Fader units (up to a maximum of
three) and turn on UNIT LINK, the connected Nuage
Fader units operate in synchronization. When you turn off
UNIT LINK, the unit operates independently.
Controls and Functions

[UNIT LINK]

Turns UNIT LINK on (lit) and off (dim).
FLIP Section
Overview
This section is for operating the FLIP function. Turning on
FLIP [KNOB 1] or [KNOB 2] lets you use the [Fader]
(page 10) in the CHANNEL STRIP section to control the
parameters assigned to the [Multi function knobs]
(page 8). [KNOB 1] represents the upper sixteen [Multi
function knobs], and [KNOB 2] represents the lower
sixteen [Multi function knobs].

When pressing [KNOB 1]

It should be noted that certain parameters assignable to
[Multi function knobs] cannot be controlled using the
[Faders].
Controls and Functions