Description of the Device
NUAGE FADER Operation Manual 22
Rear Panel[AC IN]
For connection to the power cable.
[Power switch]
Turns the power on (|) and off ( ).
NOTICE
Rapidly turning the unit on and off in succession can cause it to
malfunction. After turning the unit off, wait for at least 6 seconds
before turning it on again.
[RS-232C]
For connection to an RS-232C cable. Connect this port to
the RS-232C port on the KVM switch. When you switch
between multiple DAW applications using the DAW
SELECT section with KVM switches connected and the
data to be sent to them configured in NUAGE Workgroup
Manager, the display content, active keyboard, and active
mouse will also change accordingly. For details, refer to
the PDF manual of NUAGE Workgroup Manager
(page24).
[Network]
For connecting an Ethernet cable.