18 OPERATION GUIDE
Advanced Functions
The advanced functions are special functions not generally used
in normal operation, but for specific applications. These are also
“hidden” functions, accessed by double-clicking a button or
pressing two buttons together.

Program Change Table

The Program Change Table setting is for use with XG applica-
tions, specifically when using the P50-m to replace the piano
sounds of a connected second tone generator.
Settings: off (oFF), on
Normally (and when power is turned on), this is set to “oFF.”
When set to “oFF,” the P50-m responds only to program
changes 0 — 28. All other numbers are ignored, and the last
selected Voice stays active.
When set to “on,” the P50-m functions as a XG module for
piano parts only. In this case, program changes (0 — 5, 7)
corresponding to piano parts (according to XG) will select similar
Voices on the P50-m, and all other numbers select a “blank” si-
lent Voice (Voice No. 29). This ensures that the P50-m will play
only the piano parts in XG song data.
1. Double-click the SELECT button (press it twice quickly).

2.

Use the DATA dial to change the Program Change Table setting.
Double-click.
Lamp flashes.
Program Change Table setting.