35
<Soft Pedal> 43H
Cntrl#
parameter Data Range
67 Soft Pedal 0...127 (0-63:Off, 64-127:On)
If the Part Parameter Rcv SOFT PEDAL = OFF, that Part will
not receive Soft Pedal Messages. When the SOFT PEDAL is
set “ON” the effect will take place from the next Key On sig-
nal. Messages will control the Filter Cutoff Frequency. De-
pending upon the Voice, the effect may or may not have an
effect.
<Harmonic Content> 47H
Cntrl#
parameter Data Range
71 Harmonic Content 0...127 (0:-64, 64:+0, 127:+63)
Messages which adjust the resonance set for each. Based on a
standard of 64, these values will be added to or subtracted from
the Voice data. Depending on the Voice, the effective range
may be narrower.
<Release Time> 48H
Cntrl#
parameter Data Range
72 Release Time 0...127 (0:-64, 64:+0, 127:+63)
Messages which adjust the envelope release time. Based on a
standard of 64, values will be added to or subtracted from the
Voice data. Depending on the Voice, the effective range may
be narrower.
<Attack Time> 49H
Cntrl#
parameter Data Range
73 Attack Time 0...127 (0:-64, 64:+0, 127:+63)
Messages which adjust the envelope attack time. Based on a
standard of 64, values will be added to or subtracted from the
Voice data. Depending on the Voice, the effective range may
be narrower.
<Brightness> 4AH
Cntrl#
parameter Data Range
74 Brightness 0...127 (0:-64, 64:+0, 127:+63)
Default:40H
Messages which adjust the filter cutoff frequency. Based on a
standard of 64, values will be added to or subtracted from the
Voice data. Depending on the Voice, the effective range may
be narrower.
<Data Increment / Decrement> 60H/61H
Cntrl#
parameter Data Range
96 Increment 0...127
97 Decrement 0...127
The data byte is ignored.
RPN messages which increase or decrease the MSB value of
the parameter by 1.
<NRPN (Non-Registered Parameter Number)LSB/MSB> 62H/63H
Cntrl#
parameter Data Range
98 NRPN LSB 0...127
99 NRPN MSB 0...127
If the Part Parameter Rcv NRPN = OFF, that Part will not
receive NRPN Messages.
First send the NRPN MSB and NRPN LSB to specify the pa-
rameter which is to be controlled. Then use the Data Entry to
set the value of the specified parameter.
The following NRPN numbers can be received.
NRPN Data-entry
MSBLSB MSB
parameter Data Range
01H 08H mmH Vibrato Rate mm:00H-40H-7FH
(-64-0-+63)
01H 09H mmH Vibrato Depth mm:00H-40H-7FH
(-64-0-+63)
01H 0AH mmH Vibrato Delay mm:00H-40H-7FH
(-64-0-+63)
The Rate, Depth, and Delay Time for the Vibrato is controlled.
01H 20H mmH
Filter Cutoff Frequency
mm:00H-40H-7FH
(-64-0-+63)
01H 21H mmH Filter Resonance mm:00H-40H-7FH
(-64-0-+63)
01H 22H mmH Filter EG Depth mm:00H-40H-7FH
(-64-0-+63)
The Cut-off frequency, Resonance, and Envelope Depth for
the Filter is controlled.
01H 30H mmH Bass mm:00H-40H-7FH
(-64-0-+63)
01H 31H mmH Treble mm:00H-40H-7FH
(-64-0-+63)
The Bass and Treble are controlled.
01H 63H mmH EG Attac k Time mm:00H-40H-7FH
(-64-0-+63)
01H 64H mmH EG Decay Time mm:00H-40H-7FH
(-64-0-+63)
01H 66H mmH EG Release mm:00H-40H-7FH
(-64-0-+63)
The Attack time, Decay time, and Release time for the Enve-
lope are controlled. Based on a standard of 64, values will be
added to or subtracted from the Voice data. Depending on the
Voice, the effective range may be narrower.
<RPN (Registered Parameter Number) LSB/MSB> 64H/65H
Cntrl#
parameter Data Range
100 RPN LSB 0...127
101 RPN MSB 0...127
If the Part Parameter Rcv RPN = OFF, that Part will not re-
ceive RPN Messages.
In correspondence to the following parameters.
RPN Data-entry
LSB MSB MSB
parameter Data Range
00H 00H mmH Pitch Bend Sensitivity mm:00H-18H (0-+24)
Default:02H
MIDI Data Format