CHAPTER 1: Getting Started
5
ATO PD terminal
Accepts the power cord from the Pedal Drive (PD)
unit.
BTO MD terminal
Accepts the power cord from the Motor Drive (MD)
unit.
CTO PS terminal
Accepts the power cord from the Power Supply (PS)
unit.
DTO I/O CENTER (GREEN/BLUE) jacks
Accept the cords from the I/O Center.
ETO SENSOR port
Accepts the cable from the Disklavier.
AMAINS switch
Turns the Power Supply unit on/off.
BAC OUTLET
Accepts the power cable from the I/O Center.
CAC IN
Accepts the power cable from an AC outlet.
DAC OUTLET SWITCHED
Accepts the Monitor speakers’ AC power cables.
EAC OUTLET (unswitched)
Accepts the AC power cord of the cradle’s AC power
adaptor.
TO PD TO MD TO PS TO SENSOR
GREEN
TO I/O
BLUE
CENTER
Centra
l
S
i
gna
l
Processor
— Front —
Note: The location of
each unit differs
depending on the model.
MAINS AC
OUTLET
2A
480VA
AC
OUTLET
2A
480VA
TOTAL
AC
IN
SWITCHED
Power Supp
l
y Un
i
t
— Front —
Note: The location of
each unit differs
depending on the model.
AdvancedManual.book Page 5 Friday, May 23, 2008 11:45 AM