CHAPTER 4: Recording
57Note: You cannot record audio data when re-
recording.
Note: Metronome Mode recording (→ pg. 52) and
changing the default tempo (→ pg. 54) are not available
with this recording method.
5
Tap on .To select the part to record
Tap on the desired part ( , , or
) to change its setting (record
or not). (→ pg. 45)
To record the ensemble part
Tap on and select the voice. (→
pg. 49)
To switch the speaker output on and off
when recording
Tap on or repeatedly until the
following screen appears.
Tap on [Speaker], and press to switch between
[ON] and [OFF].
The red part will be recorded.
The white part won't be
recorded.
6
Tap on , and then adjust the volume in [MIC]. (→ pg. 27)7
Press to start recording, and then start playing the Disklavier or singing into the microphone.Recording starts.
8
Press to stop recording.To play back the recorded song,
press .
Volume bar
Adjusted value
Tap to exit.
[Audio+MIDI
Recording] icon
appears.
AdvancedManual.book Page 57 Friday, May 23, 2008 11:45 AM