CHAPTER 4: Recording
55
A song that you play on the Disklavier and the audio
input from the MIC/LINE IN jack can be recorded in the
[User Library] as audio data (WAVE file).
Recording a Song as Audio
Data
1
Tap on in the [Main] Screen.
2
Select the desired album in the list
that appears.
3
Tap on .
4
Tap on .
5
Tap on .
To cancel the recording of the internal
voice of the tone generator
Tap on .
To switch the speaker output on and off
when recording
Tap on or repeatedly until the
following screen appears.
Tap on [Speaker], and press to switch between
[ON] and [OFF].
6
Tap on [Voice], and then the desired
voice. (→ pg. 49)
7
Tap on , and then adjust
the volume in [TG] and [MIC]. (→
pg. 27)
Volume bar (MIC)
Adjusted value
Tap to exit.
Volume bar (TG)
AdvancedManual.book Page 55 Friday, May 23, 2008 11:45 AM