CHAPTER 1: Getting Started
17
Adding Your City to the [Time Zone] Drop
Down List
1Tap on .
2Tap on the time zone to be replaced with your desired
city.
3Tap on your country, and then on your city in the list.
4Tap on on the “Select City” title bar.
To correct the city selection, tap on
, and then perform step 2 thru 4 again.
Changing the Battery Charge Mode
You can change the battery charge mode for the Pocket
Controller, according to its usage condition.
[High]: Select this to charge the battery fully
anytime to use it for the long period of
time.
[Medium]: Select this to charge the battery only when
its capacity is less than 70%. This is the
default charge mode.
[Low]: Select this to charge the battery only when
its capacity is less than 50%. This mode
will prolong the battery life.
1Tap on [Battery Charge] in the [PRC-100 Menu]
screen.
2Tap on the desired mode.
3Tap on .
The [PRC-100 Menu] screen resumes.
Rebooting the Pocket Controller
When a problem occurs, first see the “Troubleshooting”
on page 96. If the problem persist, follow the procedure
below.
1Tap on on the task bar.
2Tap on [Reboot] on the menu that appears.
3
Tap on [Hour]/[Minutes] to set the
time.
4
Tap on [Time format] , and then
select the desired format.
5
Tap on , and then on [AM] or [PM],
if necessary.
6
Tap on the [Date] button, and then
tap on current date on the mini-
calendar that appears.
7
Tap on [Weeks start on] , and then
tap on [Sunday] or [Monday] that is to
be shown as the first day of the week
in the mini-calendar.
8
Tap on [Date format] , and then on
the desired format.
9
Tap on on the title bar.
The [PRC-100 Menu] screen resumes.
10
Reboot the Pocket Controller.
(→ “Rebooting the Pocket Controller” below)
AdvancedManual.book Page 17 Friday, May 23, 2008 11:45 AM