CHAPTER 1: Getting Started

16

Continue to next page...
English
The following functions are available to control the
Disklavier remotely. Set up a variety of useful functions
to your preference.
Tip: Tap on ([PRC-100 Menu] icon) to return to
the [PRC-100 Menu] screen.
[Interface]: Usually utilize this function to control
the Disklavier remotely. The [Main] screen is the top
menu of this function. ( pg. 12 in “Quick Guide”)
[Interface Updater]*: Updates the [Interface].
[Piano Assign]*: ( pg. 18 “Pairing the Pocket
Controller and the Disklavier”)
[Service Center]*: ( pg. 73 “Diagnosing the
Disklavier”)
[Light & Power]*: Makes energy conserving
settings.
[Recalibrate]: (See “Calibrating the Touch Screen”.)
[Date/Time]: (See “Setting up the Current Date and
Time”.)
[Network]*: Lists available network services.
[System Info]*: Shows system information
(memory, storage, version).
[Battery Charge]: (See “Changing the Battery Charge
Mode”.)
* For normal use, modification of these setups are not
required.
Initial Settings of the Pocket Controller
[PRC-100 Menu] screen
[PRC-100 Menu] icon
Task Bar ( pg. 19)
Title Bar

Calibrating the Touch Screen

The following procedure calibrates the touch screen to
improve the accuracy of the tapping operation.

Setting up the Current Date and Time

Tap on [Recalibrate] in the [PRC-

100 Menu] screen, and then firmly

tap on the cross hairs that appear in

sequence one by one.

When the recalibration is completed, the [PRC-100
Menu] screen resumes.
1

Tap on [Date/Time] in the [PRC-

100 Menu] screen.

2

Tap on [Time Zone] , and then on

your time zone in the drop down list.

Note: If your time zone does not appear in the
drop down list, add the zone to the list by
following the procedure in “Adding Your City
to the [Time Zone] Drop Down List” on page
17, and then repeat step 2.
Cross hair
[Set System Time] screen
[Date] button
City time button
AdvancedManual.book Page 16 Friday, May 23, 2008 11:45 AM