Advanced uses (2) – Editing functions – 19

ProR3 Digital Reverberator
Early Reflections (ER)User ER parameter

There are four User ER banks; A–D.

For each bank, you can specify 40 reflections.

For each reflection, you can specify the delay time, level, and panning.

Key Parameter Value Description
MAIN
ER Type *1
*1 Small Hall, Large Hall, Random, Reverse, Plate, Spring, User A, User B, User C, User D
Type of early reflection simulation
IniDelay 0.1 ~ 200.0 ms Delay time until early reflections are heard
Liveness 0 ~ 10 Decay characteristics of the early reflections; 0: dead, 10: live
RoomSize 0.1 ~ 25.0 Spacing of reflections
Diffusion 0 ~ 10 Spread of the early reflections
FINE
ER Number 1 ~ 40 Number of early reflections
FeedBack Delay 0.1 ~ 1000.0 ms Delay time of feedback
FeedBack Gain –99 ~ +99% Amount of feedback; “-” inverts the phase
FeedBack High 0.1 ~ 1.0 Amount of high range feedback; relative to FeedBack Gain
Density 0 ~ 100 Density of reflections
HPF Thru, 40 Hz ~ 1.0 kHz Cutoff frequency of high pass filter
LPF 400 Hz ~ 20 kHz, Thru Cutoff frequency of low pass filter
Space Mod 0 ~ 10 Modulation level
Common parameters Refer to “Common parameters” on page 27
Key Parameter Value Description
FINE
A-01 Delay 0.1 ~ 1000.0 ms Delay time of first reflection of bank A
A-01 Level –100 ~ +100% Level of first reflection of bank A
A-01 Pan L16 ~ R16 Pan position of first reflection of bank A
•
•
•
D-40 Pan
Return to the beginning of FINE (ER Number)