Front panel
3
ProR3 Digital Reverberator
5DATA/CURSOR keys
The DATA keys (INC) (DEC) are used to modify the value of the selected parameter.
The CURSOR keys (
√
) (
®
) are used to select parameters displayed in the LCD.
When the PROGRAM indicator is lit, the DATA keys are used to select the program that you
wish to recall.
6PARAMETER keys
These keys select effect parameters. Each time a key is pressed, it will cycle through the parame-
ter pages, and will finally return to the first page.
6-A MAIN key
This key accesses the main parameters. The indicator will light, and you will be able to
edit the main parameters of the program.
6-B FINE key
This key accesses secondary parameters of the program. The indicator will light, and you
will be able to edit the secondary parameters of the program.
6-C EQ, EQ ON keys
The EQ key accesses the parameters of the three-band post-effect equalizer. The indicator
will light, and you will be able to edit the EQ type, frequency, gain, and Q for each band.
The EQ ON key turns the post-effect equalizer on/off. When the equalizer is on, the green
indicator will light.
6-D GATE, GATE ON keys
The GATE key accesses the gate parameters. The indicator will light, and you will be able
to edit the level and balance, etc.
The GATE ON key turns the gate on/off. When the gate is on, the green indicator will
light.
6-E LEVEL/BAL key
This key lets you adjust the effect balance (the level balance between the direct sound and
the effect sound). When you press the key, the red indicator will light.
6-F OTHERS key
This key has two functions. When you press the key, the red indicator will light.
1
Specify a program title (see page 16).
2
Select the parameters to be controlled by MIDI Control Change messages (see page 16
and 35).
LOW MID HIGH
Type
Peaking/Shelving Peaking Peaking/Shelving
Gain
±15 dB ±15 dB ±15 dB
Frequency
32 Hz to 2.2 kHz 250 Hz to 5.6 kHz 500 Hz to 20 kHz
Q
0.1 to 5.0 0.1 to 5.0 0.1 to 5.0
MAIN FINE
LEVEL/
BAL
OTHERS
EQ EQ ON
GATE ON
GATE
B
A
C
D
EF