MIDI data format Add-5
ProR3 Digital Reverberator
2. Receive data

2-1Channel information

#1 Note On

This message can be received on the currently selected MIDI channel.
If the MIDI Trigger parameter is ON, it will be received as a gate trigger.
When a pitch-type reverb program is selected, it will be received to control the pitch. The veloc-
ity value is ignored. If the Base Key parameter is OFF, the pitch will not be controlled.

#2 Control Change

This message can be received on the currently selected MIDI channel.
When this message is received, it will control the parameter being modified by the correspond-
ing foot controller as specified by the Control Assign table.

#3 Program Change

This message can be received on the currently selected MIDI channel.
When this message is received, a program will be selected as specified by the Program Change
table of that bank.

2-2System information

#1 Program bulk dump request

This message can be received on the currently selected MIDI channel.
When this message is selected, the program of the specified User program number will be trans-
mitted as bulk data.
STATUS
NOTE No.
VELOCITY
1001nnnn(9nH)
0kkkkkkk
0vvvvvvv
n=0-15
k=0-127
v=0-127
STATUS
CONTROL No
CONTROL VALUE
1011nnnn(BnH)
0ccccccc
0vvvvvvv
n=0-15
c=1-31, 64–95
v=0–127
STATUS
PROGRAM No. 1100nnnn(CnH)
0pppppp0 n=0-15
c=0-127
STATUS
ID No.
SUB STATUS
FORMAT No.
DATA NAME
PROGRAM No.
EOX
11110000(F0H)
01000011(43H)
0010nnnn(2nH)
01111110(7EH)
01001100(4CH)
01001101(4DH)
00100000(20H)
00100000(20H)
00111000(38H)
01000001(41H)
00111000(38H)
00110011(33H)
01001101(4DH)
0mmmmmmm
11110111(F7H)
n=0-15
"L"
"M"
Space
Space
"8"
"A"
"8"
"3"
"M"
m=1-90