Yamaha ProR3 Assigning MIDI controllers

Advanced uses (3) – Utility functions – 35

ProR3 Digital Reverberator

Transmitting a MIDI bulk dump

The ProR3 allows you to transmit any type of data as a bulk dump; memory, program memory

(all programs or a speciﬁed program), banks, user ER, or system memory.

1. Repeatedly press the UTILITY key until the MIDI Bulk Out page appears.

2. Use the CURSOR keys (√) (®) to select a parameter.

3. Press the INC or DEC key to select the value.

4. Press the RECALL/ENTER key to execute the bulk dump.

Before you begin transmission, make sure that the MIDI device to which the ProR3 is connected

is ready to receive a bulk dump.

Assigning MIDI controllers

Here’s how to assign MIDI control numbers to the two controllers. The ProR3 can respond to two

controllers, and a separate page is provided to make settings for each controller.

1. Repeatedly press the UTILITY key until one of the controller assign pages appears.

2. Press the INC or DEC key to specify the control number.

The parameter selected in “Setting MIDI control parameters” of page 16 can be controlled in real-

time by receiving the speciﬁed control change message.

All All data (Program, Bank, UserER, System)

Program U01–U90,

All The data of the speciﬁed USER program.

If All is selected, data for all USER programs.

Bank A–D,

All The data of the speciﬁed Bank program change table.

If All is selected, data for all Bank data.

UserER A–D,

All The speciﬁed User ER data

If All is selected, all User ER data.

System System data settings made for utility functions such as Input Mode, etc.

MIDI Bulk Out

All Press ENTER

Controller-1 Assign

OFF

Contents

Main POWER 789 456 123 0 PRE EFFECT EQ Owners Manual Manuel dinstructions Bedienungsanleitung Manual del propietario FCC INFORMATION (U.S.A.) IMPORTANT NOTICE FOR THE UNITED KINGDOM Connecting the Plug and Cord Precautions Contents Introduction 2 Front panel 4 LCD MIDI PRESET/USER STEREO, L/R MONO 3 5DATA/CURSOR keys 6-F OTHERS key 6-E LEVEL/BAL key 6-D GATE, GATE ON keys Page Page 6 Rear panel 18 Level select switches 17 INPUT jacks 16 OUTPUT jacks 15 MIDI connectors Basic use using a preset program Turning the power on (off) Connections * Basic use using a preset program Preset Program List 10 Basic use using a preset program 11 12 Advanced uses (1) The bypass function Pre-effect EQ The INFINITE function 14 Advanced uses (2) How programs are organized Large Hall 1 Reverb RevTime = 2.5s Editing procedure 1) Selecting a program 2) Editing parameters Large Hall 1 Reverb RevTime = 2.5s 16 3) Entering a title 4) Setting MIDI control parameters 5) Saving a program Title Edit [Dread Lurgi Verb] Ctr1-1 Prm Min Max RevTIM 0.0% 100.0 Vocal Plate 2 Reverb Store from P01 to U40 ? Low Mid Filter Reverb This Program is Stored 18 Program parameters 1 (Primary effects) Reverberation (Reverb) Advanced uses (2) Editing functions 19 Early Reections (ER) User ER parameter 20 Room Simulation (RoomSim) Advanced uses (2) Editing functions 21 Reverb + Echo (Rev + Ech) 22 Reverb + Early Reections (Rev + ER) Advanced uses (2) Editing functions 23 Reverb + Chorus (Rev + Cho) 24 Reverb + Symphonic (Rev + Sym) Advanced uses (2) Editing functions 25 Reverb + Flanger (Rev + Flg) 26 Reverb + Pitch Change (Rev + Pit) Advanced uses (2) Editing functions 27 Reverb + Auto Pan (Rev + PAN) Common parameters 28 Program paramaters 2 (Secondary effects) DFL Advanced uses (2) Editing functions 29 COMP Ratio = 2:1 Threshold = -20dB Knee = SoftKnee 30 EQ Advanced uses (2) Editing functions 31 GATE 32 LEVEL/BAL Advanced uses (3) Memory protect settings Input mode setting Memory Protect ON Input Mode LR-Mix Setting the MIDI program change table MIDI Channel OMNI MIDI PGM Change Table BANK:A PGM 1= ProR U01 Transmitting a MIDI bulk dump Assigning MIDI controllers MIDI Bulk Out All Press ENTER Controller-1 Assign OFF Page Specifications 37 Specications 38 Dimensions D: 398.5 Block Diagram 370 22.3 H: 89 W: 480 MIDI data format 1. Transmitted data 1-1System information #1 Program bulk data Add-2 #2 Bank/Program Change Table bulk data #3 User ER Pattern bulk data Add-4 #4 System Setup bulk data #5 Parameter Change data 2. Receive data 2-1Channel information #1 Note On #2 Control Change #3 Program Change Add-6 #2 Bank/Program Change Table bulk dump request #3 User ER Pattern bulk dump request #4 System Setup bulk dump request #5 Bank Change request #6 Program bulk dump #7 Bank/Program Change Table bulk data #8 User ER Pattern bulk data Add-8 #11 Parameter Value Request ProR3 YAMAHA MIDI Implementation Chart Version:1.0 *1 : Note ON/OFF is recognized only for pitch change and MIDI trigger.Notes o:Yes [Digital Reverberator] Model: