34 Advanced uses (3) – Utility functions –
ProR3 Digital Reverberator

MIDI channel setting

Here’s how to set the MIDI transmit and receive channel.
1. Press the UTILITY key to access the MIDI channel setting page.
2. Press the INC or DEC key to set the channel.
OMNI: All channels 1–16 will be received, and the transmit channel will be 1.
1–16: Transmission and reception will take place on the specified channel.
OFF: MIDI data will be neither transmitted nor received.
Setting the MIDI program change table
You can make settings for each of the four MIDI program change table banks of the ProR3. With
the factory preset settings, MIDI program numbers 1–90 correspond to USER program numbers
1–90, and MIDI program numbers 91–128 correspond to PRESET program numbers 1–38.
1. Repeatedly press the UTILITY key until the MIDI program change table page appears.
2. Use the CURSOR keys (√) (®) to select a parameter.
3. Press the INC or DEC key to set the parameter. You can also use the numeric keys to
directly enter a MIDI program number.
* --- also can be input by CANCEL key.
BANK A–D Specify the program change bank
PGM 1–128 The MIDI program number
ProR
U01–U90, P01–P90
---
This is the ProR3 program number which will be recalled when the MIDI pro-
gram number is received. U01–U90 and P01–P90 respectively indicate
USER and PRESET program numbers.
With a setting of ..., nothing will be recalled. *

MIDI Channel

OMNI

MIDI PGM Change Table

BANK:A PGM 1= ProR U01