Yamaha Portatone Stop recording on the sequencer, Exit from the Initial Setup Send operation

MIDI FUNCTIONS

3 At the “InitSnd?” prompt above, set the opera- tion to standby.

Press the + button.

STYLE YESSure?

FUNCTION

4 Start recording on the sequencer, then send the Initial Setup data.

Start recording on the sequencer in the normal way, then — with as little delay as possible — press the + button to actually start transmit- ting the data.

An “End” message briefly appears in the display when the operation is complete, followed by the “InitSnd?” prompt.

5 Stop recording on the sequencer.

Stop recording on the sequencer in the normal way. Make sure that any subsequently recorded performance data is recorded at least one measure following the Initial Setup data.

6 Exit from the Initial Setup Send operation.

To exit from Initial Setup Send, press one of the other mode buttons:

SONG, STYLE, or VOICE.

103

101