Yamaha Portatone, PSR-270 Enable the EZ Chord Record mode, Call up the EZ Chord Clear function

AUTO ACCOMPANIMENT — THE STYLE MODE

Clearing an EZ Chord Bank

This operation lets you erase (clear) all recorded chords for the se- lected EZ Chord bank.

1 Enable the EZ Chord Record mode.

Press the RECORD button, repeatedly if necessary, until EZ Chord recording is selected. (“EZ” appears in the display and the “RECORD” indication flashes for a couple of seconds.)

2 Select the desired point from which chords will be cleared.

Use the +/- buttons. All chords following the selected point will be erased.

3 Call up the EZ Chord Clear function.

Wait for a couple of seconds until the “RECORD” indication stops flashing and “EZ” appears in the display. Then, hold down the “0” button until the “Clear?” prompt appears.

STYLE YESClear?

RECORD

ACMP ON

4 Execute the Clear function.

At the “Clear?” prompt, press the + button (“YES”) to actually clear the bank, or press the - button to cancel.

5 Continue recording, or exit the Record mode.

Operation returns to EZ Chord Record, letting you record a new bank of chords. To exit, simply press the RECORD button.

Erasing a Single Chord

To erase (clear) a single recorded chord in an EZ Chord bank:

1)Enable the EZ Chord Record mode.

Press the RECORD button, repeatedly if necessary, until EZ Chord recording is selected.

2)Select the desired point at which the chord will be cleared. Use the +/- buttons.

3)Execute the Clear function.

Press the C6 key (highest key on the keyboard) to actually clear the chord data.

71

69