Yamaha Portatone, PSR-270 manual Style 050Strings, Function Parameters Dual Voice

PLAYING VOICES — THE VOICE MODE

4 Change the parameter setting or value.

After the “FUNCTION” indication stops flashing, use the numeric keypad to change the value or setting. For on/off settings, use the +/- buttons.

	STYLE 050Strings
	FUNCTION
Restoring the Default Value		Negative values
If you’ve changed the parameter		To directly enter negative values (for those
setting, you can instantly restore		parameters that have negative values),
the default setting by pressing both		simultaneously hold down the - button and
+/- buttons simultaneously.		press the desired number button.

5 Set other parameters as needed.

To select and set other parameters, repeat steps 2 - 4 above.

6 Exit the Function mode.

Once you’ve made all desired settings, press one of the other mode but- tons (SONG, STYLE, or VOICE).

Function Parameters — Dual Voice

These settings are not saved when you turn off the power. If you wish to save them, save them to a User bank in the One Touch Setting feature (page 72).

The Function parameters provide all settings for the Dual voice. Like the similar settings in the Main Voice mode, these settings let you change or enhance the sound of the Dual voice separate from the Main voice. These settings include:

• Volume	• Reverb Send Level	• Dual Voice
• Octave	• Chorus Send Level	• Dual On/Off
• Pan	• DSP Effect Send Level

Function Parameters

No.	Parameter Name	Display Name	Range/Settings		Description
F11	Dual Voice Volume	D.Volume	0	— 127	This determines the volume of the Dual voice, letting
					you create an optimum mix with the Main voice.
F12	Dual Voice Octave	D.Octave	-2 — 2 (octaves)		This determines the octave range for the Dual voice.
					Use this to create an octave layer with the Main voice.
F13	Dual Voice Pan	D.Pan	-7 (full left) —		This determines the pan position of the Dual voice in
			0	(center) —	the stereo image. For a spacious sounding effect, set
			7	(full right)	this value at or near -7, and set the Main Voice Pan
					(page 31) at the opposite positive value.
F14	Dual Voice Reverb	D.RevLvl	0	— 127	This determines how much of the Dual voice’s signal is
	Send Level				sent to the Reverb effect. (See page 40.) Higher values
					result in a louder Reverb effect for the Dual voice.
F15	Dual Voice Chorus	D.ChoLvl	0	— 127	This determines how much of the Dual voice’s signal is
	Send Level				sent to the Chorus effect. (See page 41.) Higher values
					result in a louder Chorus effect for the Dual voice.
F16	Dual Voice DSP	D.DspLvl	0	— 127	This determines how much of the Dual voice’s signal is
	Effect Send Level				sent to the DSP effect. (See page 42.) Higher values
					result in a louder DSP effect for the Dual voice.
F17	Dual Voice	D.Voice	1	— 238	This determines the Dual voice. (See list on page 109.)
F18	Dual On/Off	Dual	on, off		This turns the Dual Voice mode on/off. (This is the
					same function as that of the DUAL button. It can also

be controlled by a connected footswitch; see page 91.) 35

33