Quick Guide
PSR-3000/1500 Owner’s Manual 37
Boost the volume of the part to be practiced
On the PSR-3000/1500, a single Song can contain separate data for up to sixteen MIDI channels. Specify the channel
for practicing and increase the playback volume for the channel.
1Select a Song. The method for selecting a Song is the same as “Playing a preset Song (page 35)” or “Playing a Song
from SmartMedia card (page 36).”
2Press the [MIXING CONSOLE] button to call up the MIXING CONSOLE display.
3Press the TAB [
√
][
®
] buttons to select the VOL/VOICE tab.
4Press the [MIXING CONSOLE] button until “MIXING CONSOLE (SONG CH1-8)” is shown at the top of the dis-
play.
5Press the [E]/[J] button to select “VOLUME.”
6To raise the level of the desired channel(s), press the appropriate buttons [1
ππ
ππ††
††
]–[8
ππ
ππ††
††
].
If the desired channel is not shown in the MIXING CONSOLE (SONG CH1-8) display, press the [MIXING CON-
SOLE] button to call up the MIXING CONSOLE (SONG CH9-16) display.
If you don’t know which channel’s volume to raise:
• Look at the illustrations of the instruments indicated below “VOICE.”
• Look at the channel indicators, which light as the Song plays back. Watching these as you listen can show you
which channel you wish to boost.
3
2,
4