Yamaha PSR-1500, PSR-3000 File Selection Display Conguration and Basic Operation

Basic Operation
Basic Displays (Main Display and File Selection Display)
PSR-3000/1500 Owner’s Manual 63
• LEFT (indicated at the right edge of the display):
Voice name currently selected for the LEFT part (page 77).
Pressing one of the [F], [G] and [H] buttons calls up the Voice Selection display for each
part (page 29).
@Split Point
Split Points are specific positions (notes) on the keyboard that divide the keyboard into
separate sections. There are two kinds of Split Points: “A”, which separates the chord sec-
tion from the rest of the keyboard, and “L”, which divides the left-hand and right-hand
sections.
#Registration Memory Bank name
Displays the currently selected Registration Memory Bank name.
Pressing the [J] button calls up the Registration Memory Bank Selection display (page 130).
$Volume Balance
Displays the volume balance among the parts.
Adjust the volume balance among the parts by using the [1
π† ]–[8 π† ] buttons.
File Selection Display Configuration and Basic Operation
The File Selection display appears when you press one of the buttons shown below. From here you can select
Voices, Styles, and other data.
S
ett
i
ng t
h
e
S
p
li
t
P
o
i
nt
From the Main display, press the
[I] button to call up the window
for setting the Split Point.
Press the [F] (S+L) button then
rotate the [DATA ENTRY] dial to
set the Split Point (S) and Split
Point (L) to the same note num-
ber.
Press the [H] (S) or [G] (L) button
then rotate the [DATA ENTRY]
dial to set the Split Point (S) or
the Split Point (L) to the desired
note number independently.
VOICE category
selection buttons
SONG SELECT
button
REGIST. BANK
selection button