Quick Guide
PSR-3000/1500 Owner’s Manual 55
Singing with the Lyrics Display
Try singing while playing back a Song containing lyric data
Sing while following along with the lyrics on the display. The color of the lyrics changes as the Song plays.
nWhen the lyrics are unreadable
You may need to change the Lyrics Language setting to “International” or “Japanese” in the Song Setting display ([FUNCTION]
[B] SONG SETTING), if the lyrics shown are garbled or unreadable. This setting can be memorized as part of the Song data
(page 160).
Changing the Lyrics Background Picture (PSR-3000)
You can change the background picture of the Lyrics display. Press the [7
π†
]/[8
π†
] (BACKGROUND) button in the Lyrics dis-
play to call up the Lyrics picture selection display for the available picture files and select the desired one. Press the [EXIT] button
to return to the previous display.
Changing the lyrics
You can change the lyrics as desired (page 164).
Convenient Functions for Karaoke

Transpose

You can use this to adjust the key of the Song if it is too high or low.
•Transposing the Song key up................Press the TRANSPOSE [+] button.
•Transposing the Song key down........... Press the TRANSPOSE [–] button.
• Resetting the transposition................... Press the TRANSPOSE [+][–] buttons simultaneously.
Adjusting the tempo page 34
PSR-3000/1500
Transpose See below.
Applying Effects to Your Voice page 56
PSR-3000Adding Harmony Vocals to Your Voice page 56
Practicing Singing with Proper Pitch (Vocal CueTIME) page 139
1Select a Song (page 35).
2Press the [KARAOKE] button to display the lyrics.
3Press the SONG [PLAY/PAUSE] button to start playback.
4Press the SONG [STOP] button to stop playback.
12
FOOT PEDAL VIDEO OUT
Displaying the lyrics on an external TV monitor (PSR-3000)
The lyrics indicated on the display can also be output via the VIDEO OUT terminal.
1Use an appropriate video cable to connect the [VIDEO OUT]
connector of the PSR-3000 to the VIDEO INPUT connector on
the TV monitor.
2Set the external television/video monitor signal (NTSC or PAL)
used by your video equipment, if necessary.
1Call up the operation display.
[FUNCTION] [G] VIDEO OUT
2Press the [1
π†
] button to select the external television/
video monitor signal.