Yamaha PSR-1500, PSR-3000 6, 7, 8, 9, 10

Editing the Volume and Tonal Balance (MIXING CONSOLE)
PSR-3000/1500 Owner’s Manual 91
Using, Creating and Editing Voices
6Use the [3 ππ
ππ†† ††
]/[4 ππ
ππ†† ††
] buttons to select the part to which you want
to apply the effect.
7Use the [5 ππ
ππ†† ††
]/[6 ππ
ππ†† ††
] buttons to select the effect CATEGORY.
8Use the [7 ππ
ππ†† ††
]/[8 ππ
ππ†† ††
] buttons to select the effect TYPE.
If you want to edit the effect parameters, go on to the next operation.
■Editing and Saving the selected effect
9Press the [F] (PARAMETER) button to call up the display for editing
the effect parameters.
10 If you have selected one of the DSP 2-4 effect blocks in step 5:
You can edit its standard parameters as well as its variation parameter.
To select the standard type of parameters, press the [B] button. To select its
variation parameter, press the [E] button.
Effect Block Effect-applicable parts Effect characteristics
REVERB All parts Reproduces the warm ambience of playing
in a concert hall or jazz club.
CHORUS All parts Produces a rich “fat” sound as if several
parts are being played simultaneously.
DSP1 STYLE PART
SONG CHANNNEL 1–16
In addition to the Reverb and Chorus types,
the PSR-3000/1500 has special DSP effects,
that include additional effects usually used
for a specific part, such as distortion and
tremolo.
DSP2
DSP3
DSP4
RIGHT 1, RIGHT 2, LEFT,
SONG CHANNEL 1-16
Microphone sound*
(PSR-3000)
Any unused DSP blocks are automatically
assigned to the appropriate parts (channels)
as needed.
* Handled only by DSP4.