Yamaha R-V303 CONNECTING SPEAKERS, How to Connect:

CONNECTING SPEAKERS

English

Rear speaker	Center speaker	Rear speaker
Right		Left

Note

Use speakers with the specified impedance shown on the rear of this unit.

(U.S.A. model)

SPEAKERS	IMPEDANCE SELECTOR
REAR CENTER REAR	SET BEFORE POWER ON
	REAR SINGLE:6ΩMIN. /SPEAKER
		DUAL:3ΩMIN. /SPEAKER
	CENTER	6ΩMIN. /SPEAKER
	MAIN	4ΩMIN. /SPEAKER
REAR	REAR SINGLE:8ΩMIN. /SPEAKER
SINGLE		DUAL:4ΩMIN. /SPEAKER
	CENTER	8ΩMIN. /SPEAKER
	MAIN	8ΩMIN. /SPEAKER

	Main speakers
CAUTION SEE INSTRUCTION MANUAL FOR CORRECT SETTING.
MAIN
Left	Right

How to Connect:

Connect the SPEAKERS terminals to your speakers with wire of the proper gauge (cut as short as possible). If the connections are faulty, no sound will be heard from the speakers. Make sure that the polarity of the speaker wires is correct, that is the + and – markings are observed. If these wires are reversed, the sound will be unnatural and lack bass.

Caution

Do not let the bare speaker wires touch each other or any metal part of this unit. This could damage this unit and/or speakers.

For connecting to the MAIN SPEAKERS terminals

Red: positive (+)

Black: negative (–)

➀Press the tab.

➁Insert the bare wire. [Remove approx. 5mm (1/4”) insulation from the speaker wires.]

➂Release the tab and secure the wire.

➁ ➂ ➀

For connecting to the REAR and CENTER SPEAKERS terminals

Red: positive (+)

Black: negative (–)

	➀
➂	➀Press the tab.
	➁Insert the bare wire.
➁	[Remove approx. 5mm
	(1/4”) insulation from
	the speaker wires.]
	➂Release the tab and
	secure the wire.

9