7A/B/C/D/E button

Press this button to select a desired group (A–E) of preset stations.

8Preset station number selector buttons Select a preset station number (1 to 8).

9Tone controls

These controls are effective only for the sound from the main speakers.

BASS

Used to increase or decrease the low frequency response. The 0 position produces flat response.

TREBLE

Used to increase or decrease the high frequency response. The 0 position produces flat response.

0BALANCE control

This control is effective only for the sound from the main speakers.

Adjusts the balance of the output volume to the left and right speakers to compensate for sound imbalance caused by speaker location or listening room conditions.

AFM/AM button

Press this button to switch the reception band to FM or AM.

BMEMORY (MAN’L/AUTO FM) button

When this button is pressed, the “MEMORY” indicator flashes for about 5 seconds. While the indicator is flashing, select a desired preset station number by pressing the corresponding preset station number selector button to enter the displayed station into the memory.

When this button is held down for more than 3 seconds, the automatic preset tuning begins. (For details, refer to page 22.)

CEDIT button

This button is used to exchange the places of two preset stations with each other.

DTUNING DOWN/UP button

Used for tuning. Press the “UP” side to tune in to higher frequencies, and press the “DOWN” side to tune in to lower frequencies.

ETUNING MODE (AUTO/MAN’L MONO) button Press this button to switch the tuning mode to automatic or manual. To select the automatic tuning mode, press this button so that the “AUTO TUNING” indicator lights up on the display. To select the manual tuning mode, press this button so that the “AUTO TUNING” indicator goes off.

FEFFECT button

Switches on/off the digital sound field processor (including the Dolby Pro Logic Surround decoder).

GPROGRAM selector button

When the built-in digital sound field processor (including the Dolby Pro Logic Surround decoder) is on, this button changes the currently selected DSP program every time the right or left side of this button is pressed.

HCENTER MODE button

Selects a center channel output mode (NORM, WIDE or PHANTOM). (For details, refer to page 16.)

ICENTER LEVEL control

Adjusts the sound output level of the center speaker.

JREAR LEVEL control

Adjusts the sound output level of the rear speakers.

English

13