Yamaha R-V303 SPECIFICATIONS, FM SECTION, AUDIO SECTION, VIDEO SECTION

SPECIFICATIONS

AUDIO SECTION

Minimum RMS Output Power per Channel Main L, R

8 ohms, 20 Hz to 20 kHz, 0.04% THD

......................................................	50W+50W
Center
8 ohms, 1 kHz, 0.04% THD.....................	50W
Rear
8 ohms, 1 kHz, 0.04% THD ....................	20W
Maximum Power (EIAJ) [China and General
models only]
8 ohms, 1 kHz, 10% THD
Main L, R ....................................	75W+75W
Center ..................................................	75W
Rear ....................................................	30W

Dynamic Power per Channel

(by IHF Dynamic Headroom measuring method)

8/6/4/2 ohms

[U.S.A. and Canada models]

..........................................	80/95/120/140W
[Europe, Australia, China and General
models] ...........................	80/100/120/135W
DIN Standard Output Power per Channel
[Europe model only]
4 ohms, 1 kHz, 0.7% THD ...................		75W

Dynamic Headroom (8 ohms) [U.S.A. and Canada models only]

...........................................................		2.04 dB
IEC Power [Europe model only]
8 ohms, 1 kHz, 0.1% THD		......................60W
Power Band Width
8 ohms, 25W, 0.1% THD
.............................................		10 Hz to 50 kHz
Damping Factor
8 ohms, 20 Hz to 20 kHz ...............		50 or more
Input Sensitivity/Impedance
PHONO MM......................		2.5 mV/50 k-ohms
CD/TAPE·MD/VIDEO/VCR
.........................................	150 mV/50 k-ohms
Maximum Input Signal
PHONO MM
1 kHz, 0.5% THD ............................		100 mV
CD/TAPE·MD/VIDEO/VCR (EFFECT OFF)
1 kHz, 0.5% THD .................................		2.5V
Output Level/Impedance
REC OUT........................	150 mV/2.5 k-ohms

Headphones Jack Rated Output/Impedance Output Level (8 ohms, 0.04% THD) .....0.45V

Impedance .....................................		330 ohms
Frequency Response (20 Hz to 20 kHz)
CD/TAPE·MD/VIDEO/VCR..............		0±0.5 dB
RIAA Equalization Deviation
PHONO MM ....................................		0±0.5 dB
Total Harmonic Distortion (20 Hz to 20 kHz)
PHONO MM to REC OUT
1V......................................................		0.02%
CD/TAPE·MD/VIDEO/VCRto SP OUT
30W/8 ohms ......................................		0.03%
Signal-to-Noise Ratio (IHF-A Network)
PHONO MM to REC OUT
(5 mV Input Shorted)..........................		80 dB
CD/TAPE·MD/VIDEO/VCRto SP OUT
(Shorted) ............................................		93 dB
Residual Noise (IHF-A Network)
MAIN L/R............................................		140 ∝V
Channel Separation (Vol. –30 dB, EFFECT
OFF)
PHONO MM
(Input Shorted, 1 kHz)........................		60 dB
CD/TAPE·MD/VIDEO/VCR
(Input 5.1 k-ohms Terminated, 1 kHz)
...........................................................		60 dB
Tone Control Characteristics
BASS: Boost/cut ...............	±10 dB (50 Hz)
Turnover Frequency...........		350 Hz
TREBLE: Boost/cut .............	±10 dB (20 kHz)
Turnover Frequency..........		3.5 kHz
Gain Tracking Error (0 to –60 dB).............		3 dB

VIDEO SECTION

Video Signal Level ..................	1 Vp-p/75 ohms
Maximum Input Level ............	1.5 Vp-p or more
Signal-to-Noise Ratio.................	50 dB or more

Monitor Out Frequency Response

.....................................5 Hz to 10 MHz, –3 dB

FM SECTION

Tuning Range

[U.S.A. and Canada models]

..........................................	87.5 to 107.9 MHz
[Europe, Australia, China and General
models]..............................	87.5 to 108.0 MHz

50 dB Quieting Sensitivity (IHF, 75 ohms) [U.S.A., Canada, Australia, China and

General models only]
Mono...............................	1.55	∝V (15.1 dBf)
Stereo ................................	21	∝V (37.7 dBf)

Usable Sensitivity (75 ohms)
[Europe and Australia models only]
DIN, Mono (S/N 26 dB)......................	0.9	∝V
DIN, Stereo (S/N 46 dB) .....................	24	∝V

Image Response Ratio

[U.S.A., Canada, China and General models]

..............................................................	45 dB
[Europe and Australia models] .............	80 dB

IF Response Ratio

[U.S.A., Canada, China and General models]

..............................................................	70 dB
[Europe and Australia models] .............	80 dB
Spurious Response Ratio.........................	70 dB

AM Suppression Ratio

[U.S.A., Canada, China and General models]

..............................................................	55 dB
[Europe and Australia models] .............	50 dB
Capture Ratio ..........................................	1.5 dB

Alternate Channel Selectivity

[U.S.A., Canada, China and General models

only] .......................................................

85 dB

Selectivity (two signals, 40 kHz Dev. ±300 kHz) [Europe and Australia models only]

...............................................................70 dB

Signal-to-Noise Ratio

(IHF) Mono/Stereo

[U.S.A., Canada, China and General models] .....................................80 dB/75 dB

(DIN-Weighted, 40 kHz Dev.) Mono/Stereo [Europe and Australia models]

..................................................75 dB/70 dB

Harmonic Distortion (1 kHz)

[U.S.A., Canada, Australia, China and

General models]
Mono/Stereo ...................................	0.1/0.2%
[Europe model]
Mono/Stereo (40 kHz Dev.) ............	0.1/0.2%

Stereo Separation (1 kHz)

[U.S.A., Canada, Australia, China and

General models] ...................................	50 dB
[Europe model (40 kHz Dev.)]..............	50 dB
Frequency Response
20 Hz to 15 kHz..............................	0 ±1.5 dB