Adjustment of the CENTER LEVEL

If desired, you can adjust the sound output level of the center speaker even if the output level is already set in “SPEAKER BALANCE ADJUSTMENT” on page 17.

CENTER

LEVEL

0 l0

Note

This adjustment is useful only when the digital sound field

program PRO LOGIC or 3 STEREO is selected.

Adjustment of DELAY TIME

You can adjust the time difference between the beginning of the sound from the main speakers and the beginning of the effect sound from the rear speakers.

The larger the value, the later the effect sound is generated.

This adjustment can be made to all programs (except 3 STEREO) individually.

Control range: 15, 20, 25, 30 milliseconds

Preset value

PRO LOGIC: 25 milliseconds

HALL:

20 milliseconds

ROCK:

15 milliseconds

This adjustment can be made only by using the remote control transmitter.

— DELAY TIME +

 

ms

FM

20

 

NORM WID

Adjustment of the REAR LEVEL

If desired, you can adjust the sound output level of the rear speakers even if the output level is already set in “SPEAKER BALANCE ADJUSTMENT” on page 17.

REAR

LEVEL

0 l0

Note

This adjustment is useful only when the digital sound field

program PRO LOGIC, ROCK or HALL is selected.

Adjustable

Notes

●When 3 STEREO is selected, this adjustment cannot be made.

●Adding too much delay will cause an unnatural effect with some sources.

●The value of the delay time you last set will remain memorized even when this unit is in the standby mode. However, if the power cord is kept disconnected for more than one week, these values will be automatically changed back to the original factory settings.

●When the DELAY TIME key is pressed, the sound may be momentarily interrupted.

26