SPEAKER SETUP

SPEAKERS TO BE USED

This unit is designed to provide the best sound-field quality with a 5-speaker configuration. The most effective speakers to use with this unit are main speakers, rear speakers and a center speaker. You can use only one rear speaker instead of using two rear speakers, and omit the center speaker. (Refer to the “SPEAKER CONFIGURATION” shown below.)

The main speakers are used for the main source sound plus the effect sounds. They will probably be the speakers from your present stereo system. The rear speakers are used for the effect and surround sounds, and the center speaker is for the center sounds (dialog etc.) within the programs encoded with Dolby Surround. The center speaker needs to be equal in power to the main speakers although the rear speakers should not be equal. However, all the speakers should have high enough power handling to accept the maximum output of this unit.

SPEAKER CONFIGURATION

English

5-Speaker Configuration

This configuration is the most effective and recommended one. In this configuration, the center speaker is necessary as well as

the rear speakers. If the program PRO LOGIC or 3 STEREO is selected, conversations will be output from the center speaker and the ambience will be excellent.

•Set the center channel mode to the “NORM” or “WIDE” position. (For details, refer to page 16.)

4-Speaker Configuration (without the center speaker)

The center speaker is not used in this configuration. If the

program PRO LOGIC is selected, the center sound will be output from the left and the right main speakers. The program

3 STEREO has no effect in this configuration. However, the sound effect of other programs can be almost the same as that of the 5-speaker configuration.

•Be sure to set the center channel mode to the “PHANTOM” position. (For details, refer to page 16.)

Main L

 

Center

 

Main R

 

Main L

 

Center

 

Main R

 

Main L

 

Main R

 

Main L

 

Main R

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Rear L

 

Rear R

 

Rear

 

Rear L

 

Rear R

 

Rear

 

 

 

 

 

 

 

 

 

 

 

 

 

(Two rear speakers)

(One rear speaker)

(Two rear speakers)

(One rear speaker)

Note

As this unit is equipped with a monaural amplifier for the rear channel, sounds output from the rear speakers are in monaual. So, you may use only one rear speaker instead of using two rear speakers.

However, the use of two rear speakers is recommended when there is more than one listener in the listening room. When using one rear speaker, place it right behind your listening position.

SPEAKER PLACEMENT

The recommended speaker configuration, the 5-speaker configuration, will require two speaker pairs: main speakers (your normal stereo speakers), and rear speakers, plus a center speaker. When you place these speakers, refer to the following.

Main R

Center

Main L

TV set

Rear R

Main: In normal position. (The position of your present stereo speaker system.)

Rear: Behind your listening position, facing slightly inward. Nearly 1.8m (approx. 6 feet) up from the floor.

Center: Precisely between the main speakers. (To avoid interference with TV sets, use a magnetically shielded speaker.)

Rear L

7