DISPLAY PANEL
1 | 2 | 3 | 4 |
|
|
|
|
|
| AUTO STEREO |
|
|
|
|
|
|
| MHz 0 20 | l00 |
|
|
|
|
|
| TAPE MON | |
MEMO | PS | PTY | RT | CT PTY HOLD EON | NEWS INFO AFFAIRS SPORT | SLEEP | 2 |
5 | 6 | 7 | 8 | 9 | 0 | A |
English
:
1
Displays various information, for example station frequency, preset station number and name of selected input source.
2AUTO indicator
Lights up when this unit is in the automatic tuning mode.
3STEREO indicator
7PTY HOLD indicator
Lights up while the search is performed in the PTY SEEK mode.
8EON indicator
Lights up when an FM stereo broadcast with sufficient signal strength is received.
4
Indicates the signal level of the received station.
If multipath interference is detected, the indication decreases.
5MEMO indicator
When the MEMORY button is pressed, this indicator flashes for about 5 seconds. While this indicator is flashing, the displayed station can be programmed to the memory by using the A/B/C/D/E button and the preset station number selector buttons.
6RDS mode indicators
Lights up when an RDS station that employs the EON data service is received.
9Program type name indicators
The name selected in the EON mode lights up.
0SLEEP indicator
Lights up while the
ATAPE MON 2 indicator
Lights up when the tape deck (or MD recorder etc.) connected to the TAPE 2 terminals on the rear of this unit is selected as the input source by pressing the TAPE 2 MONITOR button.
The name(s) of RDS mode(s) employed by the currently received RDS station light(s) up. Illumination of the indicator on the head of a name shows that the corresponding RDS mode is now selected.
13
