Yamaha RX-V1000RDS ■To mute the sound, ■Notes on the digital signal, ■When you have finished using this unit, BASIC, English, See page, OPERATION, remote control

To select a source connected to the 6CH INPUT jacks

Press 6CH INPUT until “6CH INPUT” appears on the front panel display and on the video monitor.

6CH INPUT	6CH INPUT
	or
Front panel	Remote control

Notes

•If “6CH INPUT” is shown on the front panel display and on the video monitor, no other source can be played. To select another input source with INPUT l / h (or the input selector buttons), press 6CH INPUT to turn off “6CH INPUT” from the front panel display and the video monitor.

•If you want to enjoy an audio source connected to the 6CH INPUT jacks together with a video source, first select the video source and then press 6CH INPUT.

4Start playback (or select a broadcast station) on the source component.Refer to the operation instructions for the component.5Adjust the volume to the desired output level.

If desired, use BASS, TREBLE and BASS EXTENSION, etc. These controls are only effective

for sound from the main speakers.

VOLUME

			+
		or	VOLUME
			–
Front panel			Remote control
BASS	TREBLE
			BASS	PROCESSOR
			EXTENSION	DIRECT
–	+ –	+		OFF

Front panel

Note

•If the component connected to the VCR 1 OUT, VCR 2/DVR OUT, CD-R OUT and MD/TAPE OUT jacks is turned off, the reproduced sound may be distorted or the volume may be lowered. In these cases, turn on the component.

BASIC PLAYBACK

6Use the digital sound field processor.

See page 28.

10KEY DSP	HALL 1	HALL 2	CHURCH	JAZZ CLUB
PROGRAM	1	2	3	4
or	ROCK		ENTER-	TV
	CONCERT	STADIUM	TAINMENT	SPORTS
	5	6	7	8
	MONO	MOVIE	MOVIE	/DTS
	MOVIE	THEATER 1	THEATER 2	SUR.
	9	10	11	12
		0	+10	+100
Front panel	Remote control

■To mute the sound

Press MUTE on the
remote control.	MUTE

To restore the audio output to the previous volume level, press MUTE again.

y

•You can also cancel mute to press any operation buttons such as VOLUME +/–.

•During muting, “MUTE ON” appears on the front panel display and on the video monitor.

■When you have finished using this unitPress STANDBY/ON (or STANDBY) to set this unit in the standby mode.■Notes on the digital signalThe digital input jacks of this unit can also handle

96-kHz sampling digital signals. (To utilize this, use a source that supports 96-kHz sampling digital signals and set the player for digital output. Refer to the operation instructions for the player.) Note the following when a

96-kHz sampling digital signal is input to this unit:1.The following indication will appear on the front panel display.

	VOLUME		DVD
		D-TV/LD	MD/TAPE
PRO LOGIC		CBL/SAT	CD-R
		VCR 1	TUNER
SP		VCR2/DVR	CD
AB		V-AUX	PHONO

2.DSP programs cannot be selected. Sound will be output as normal 2-channel stereo sound from only the left and right main speakers.

Note

•If “1B MAIN SP” on the SET MENU is set to SMALL or “1E LFE/BASS OUT” is set to BOTH, the sound is also output from the subwoofer.

3.Adjustment of the speaker output level described on page 48 cannot be made.

OPERATION BASIC

English

25