TROUBLESHOOTING

Problem

Cause

Remedy

Refer to

page

 

 

 

 

 

 

 

 

 

No sound from the

The sound effect is off.

Press EFFECT to turn it on.

29

effect speakers.

 

 

 

A Dolby Surround, Dolby Digital or

Select another DSP program.

64 – 67

 

 

 

 

DTS decoding DSP program is being

 

 

 

 

used with material not encoded with

 

 

 

 

Dolby Surround, Dolby Digital or DTS.

 

 

 

 

 

 

 

 

 

A 96-kHz sampling digital signal is

 

25

 

 

being input to this unit.

 

 

 

 

 

 

 

No sound from the

The output level of the center speaker is set

Raise the level of the center speaker.

48

center speaker.

to minimum.

 

 

 

 

 

 

 

 

 

“1A CENTER SP” on the SET MENU

Select the appropriate mode for your center

41

 

 

is set to NONE.

speaker.

 

 

 

 

 

 

 

 

One of the Hi-Fi DSP programs (1 to 7)

Select another DSP program.

64 – 67

 

 

has been selected.

 

 

 

 

 

 

 

 

 

The source encoded with a Dolby

 

—

 

 

Digital or DTS signal does not have a

 

 

 

 

center channel signal.

 

 

 

 

 

 

 

No sound from the rear

The output level of the rear speakers is set

Raise the output level of the rear speakers.

48

speakers.

to minimum.

 

 

 

 

 

 

 

 

 

A monaural source is being played with

Select another DSP program.

64 – 67

 

 

the program 12.

 

 

 

 

 

 

 

No sound from the

“1E LFE/BASS OUT” on the SET MENU

Select SWFR or BOTH.

42

subwoofer.

is set to MAIN when a Dolby Digital or

 

 

 

 

DTS signal is being played.

 

 

 

 

 

 

 

 

 

“1E LFE/BASS OUT” on the SET

Select BOTH.

42

 

 

MENU is set to SWFR or MAIN when a

 

 

 

 

2-channel source is being played.

 

 

 

 

 

 

 

 

 

The source does not contain low bass

 

—

 

 

signals (90 Hz and below).

 

 

Poor bass reproduction.

“1E LFE/BASS OUT” on the SET MENU

Select MAIN.

42

 

 

is set to SWFR or BOTH and your system

 

 

 

 

does not include a subwoofer.

 

 

 

 

 

 

 

 

 

The output mode for each speaker (main,

Select the appropriate output mode for each

40 – 42

 

 

center or rear) on the SET MENU does not

speaker based on the size of the speakers in

 

 

 

match your speaker configuration.

your configuration.

 

 

 

 

 

 

No sound from the rear

“1D REAR CT SP” on the SET MENU is

Select LRG or SML.

42

center speaker.

set to NONE.

 

 

 

 

 

 

A “humming” sound can

Incorrect cable connections.

Firmly connect the audio plugs. If the

12 – 15

be heard.

 

problem persists, the cables may be

 

 

 

 

defective.

 

 

 

 

 

 

 

 

No connection from the turntable to the

Connect the grounding cord of your

12, 13

 

 

GND terminal.

turntable to the GND terminal of this unit.

 

 

 

 

 

 

The volume level is low

The record is being played on a turntable

The turntable should be connected to the unit

12

while playing a record.

with an MC cartridge.

through an MC-head amplifier.

 

 

 

 

 

 

76