Yamaha RX-V1000RDS ■AC OUTLET(S) (SWITCHED), IMPEDANCE SELECTOR Switch, Connecting the Power Supply Cords, WARNING, English

CONNECTIONS

IMPEDANCE SELECTOR SwitchWARNING

Do not change the IMPEDANCE SELECTOR switch setting while the power of this unit is on, otherwise the unit may be damaged.

If this unit fails to turn on when STANDBY/ON (or SYSTEM POWER) is pressed, the IMPEDANCE SELECTOR switch may not be fully slid to either position. If so, slide the switch to either position fully when this unit is in the standby mode.

Select the left or right position according to the impedance of the speakers in your system. Be sure to move this switch only when this unit is in the standby mode.

(Europe model)

Switch

Speaker

Impedance level

PREPARATION

position

If you use one set of main speakers, the impedance of each

MAINS

Main

speaker must be 4 Ω or higher.

AC OUTLETS

Left

If you use two sets of main speakers, the impedance of

SWITCHED

each speaker must be 8 Ω or higher.

100W MAX. TOTAL

Center

The impedance must be 6 Ω or higher.

Rear

The impedance of each speaker must be 6 Ω or higher.

If you use one set of main speakers, the impedance of each

speaker must be 8 Ω or higher.

SET BEFORE POWER ON

IMPEDANCE SELECTOR

Main

MAIN A OR B: 4

MIN. /SPEAKER

MAIN A OR B: 8

MIN. /SPEAKER

If you use two sets of main speakers, the impedance of

CENTER

: 6

MIN. /SPEAKER

CENTER

: 8

MIN. /SPEAKER

A + B: 8 MIN. /SPEAKER

A + B:16 MIN. /SPEAKER

REAR

: 6

MIN. /SPEAKER

REAR

: 8

MIN. /SPEAKER

Right

each speaker must be 16 Ω or higher.

Center

The impedance must be 8 Ω or higher.

Rear

The impedance of each speaker must be 8 Ω or higher.

IMPEDANCE SELECTOR

Connecting the Power Supply Cords

After completing all connections, connect the AC power cord to an AC power outlet. Disconnect the AC power cord if you will not use this unit for a long period of time.

■AC OUTLET(S) (SWITCHED)

(Europe model)

MAINS

AC OUTLETS

SWITCHED

100W MAX. TOTAL

	IMPEDANCE SELECTOR
		SET BEFORE POWER ON
MAIN A OR B: 4			MIN. /SPEAKER	MAIN A OR B: 8		MIN. /SPEAKER
	A + B: 8		MIN. /SPEAKER		A + B:16	MIN. /SPEAKER
CENTER	: 6		MIN. /SPEAKER	CENTER	: 8	MIN. /SPEAKER
REAR	: 6		MIN. /SPEAKER	REAR	: 8	MIN. /SPEAKER

To AC outlet

Europe model ...............................................	2 OUTLETS
U.K. model .....................................................	1 OUTLET

Use these outlets to connect the power cords from your components to this unit. The power to the AC OUTLET(S) is controlled by this unit’s STANDBY/ON (or SYSTEM POWER and STANDBY). These outlets will supply power to any connected component whenever this unit is turned on. The maximum power (total power consumption of components) that can be connected to the AC OUTLET(S) is 100 W.

SWITCHED

English

19